Wheel Bearing Kits VKBA6806 For Hyundai
The DUHUI Bearing VKBA6806 wheel bearing kit is a rear axle hub assembly designed for the Hyundai Atos (MX). This comprehensive kit includes a pre-assembled hub unit with an integrated ABS sensor ring and securing nut, providing a complete solution for rear wheel bearing replacement. It matches OE specifications including 52710-02500 and 52710-02550, with cross-references to SKF VKBA6806 and SNR R184.56.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK761 |
| Part Number | VKBA6806 |
| Product Type | Wheel Bearing Kit – Hub Assembly |
| Fitting Position | Rear Axle (Left/Right) |
| Kit Contents | 1 Hub Unit with Bearing, 1 Nut |
| Flange Diameter | 139.70 mm (5.500 inch) |
| Wheel Stud Quantity | 4 |
| ABS Sensor Ring | Integrated (38 teeth) |
| Outer Diameter | 140.00 mm (5.512 inch) |
| Width | 64.50 mm (2.539 inch) |
Note: Dimensional and technical data is based on SKF and aftermarket manufacturer specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK761
OE Numbers:
52710-02500, 52710-02550, 52710-25000, 52710-25001
Reference Numbers (Interchange):
SKF: VKBA6806
SNR: R184.56
FAG: 713619600
RUVILLE: 8417
NIPPARTS: J4710526
A.B.S.: 200919
MAPCO: 26578
BLUE PRINT: ADG08336
OPTIMAL: 922144
Vehicle Fitment
HYUNDAI ATOS (MX): 1997-2010
Engine Compatibility: 1.0i (54-58 HP / 40-43 kW), 1.1 (58-63 HP / 43-46 kW)
Model Years: 1998-2010
This kit is specifically designed for models equipped with ABS. For non-ABS models, please verify fitment before ordering.
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes a pre-assembled hub unit with bearing and securing nut – all components needed for a full hub replacement on compatible Hyundai Atos models.
- Designed specifically for Hyundai Atos (MX) rear axle applications – verified fitment for 1997-2010 model years.
- Integrated ABS sensor ring with 38 teeth ensures proper speed signal transmission for vehicles equipped with anti-lock braking systems.
- 4-bolt flange configuration with 139.7 mm flange diameter matches OE specifications for direct fitment.
- Pre-greased and pre-assembled hub unit simplifies installation, requiring no shims or complex adjustments.
- Cross-referenced with SKF VKBA6806, SNR R184.56, and FAG 713619600 – confirmed interchange available.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm flange diameter (139.7 mm) and 4-bolt configuration.
- This kit is designed for rear axle fitment on Hyundai Atos (MX) with ABS – confirm placement and ABS system presence before ordering.
- The hub assembly is pre-assembled with integrated bearing and ABS sensor ring – handle with care to avoid contamination or damage to the bearing surfaces.
- For vehicles with ABS, ensure the integrated sensor ring with 38 teeth is correctly positioned during installation.
- Torque the securing nut and wheel bolts to Hyundai service manual specifications for the MX chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
