VKBA1948 Wheel Bearing Kits For KIA MAZDA
The DUHUI Bearing VKBA1948 wheel bearing kit is a rear axle replacement kit designed for Kia Carens, Clarus, Shuma and compatible Mazda 323, 626 models. This comprehensive kit includes the bearing, circlip, securing nut, and oil seal, providing all components needed for a complete rear wheel bearing replacement. It matches OE specifications including 0K2JT33047 and FB0126151A, with cross-references to SKF VKBA1948 and QUINTON HAZELL QWB919.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK138 |
| Part Number | VKBA1948 |
| Product Type | Wheel Bearing Kit |
| Fitting Position | Rear Axle |
| Kit Contents | 1 Bearing, 1 Circlip, 1 Nut, 1 Oil Seal |
| Inner Diameter | 32.00 mm (1.260 inch) |
| Outer Diameter | 80.00 mm (3.150 inch) |
| Width | 41.00 mm (1.614 inch) |
| Weight | 1.00 kg (2.20 lb) |
Note: Dimensional data is based on SKF and aftermarket manufacturer specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK138
OE Numbers:
0K2JT33047, FB0126151A, 0K2JT-33-047, FB01-26-151A
Reference Numbers (Interchange):
SKF: VKBA1948
QUINTON HAZELL: QWB919
A.B.S.: 200619
AUTOKIT: 01.96831
Vehicle Fitment
KIA CARENS I (FC): 1.8 i 2000-2002
KIA CLARUS (K9A): 1.8 i 16V 1996-2001
KIA SHUMA I (FB): 1.8 i 16V 1997-2001
MAZDA 323 C IV (BG): 1.8 16V 4WD (BG8S) 1991-1993
MAZDA 626 III Hatchback (GD): 2.2 12V 4WD 1987-1990
MAZDA 626 V (GF): 1.8 (GF8P) 1997-1999
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes bearing, circlip, nut, and oil seal – all components needed for a full rear hub rebuild on compatible Kia and Mazda models.
- Designed for Kia Carens, Clarus, Shuma and Mazda 323, 626 rear axle applications – verified fitment for 1987-2002 model years.
- Precision-engineered bearing with 32 mm inner diameter and 80 mm outer diameter matches OE specifications for direct replacement.
- Cross-referenced with SKF VKBA1948 and QUINTON HAZELL QWB919 – confirmed interchange available.
- Comprehensive kit format simplifies maintenance – no need to source individual components separately.
- Constructed from high-grade GCr15 bearing steel for superior load-bearing capacity and service life.
Installation Notes
- Verify the kit contents match your original bearing before installation – confirm inner diameter (32.00 mm) and outer diameter (80.00 mm).
- This kit is designed for rear axle fitment on compatible Kia and Mazda models – confirm placement before ordering.
- Inspect the axle shaft and hub surface for wear or damage before installing new components.
- Ensure the supplied circlip is properly seated in its groove after bearing installation.
- Replace the included oil seal during installation to prevent lubricant leakage and contamination.
- Torque the securing nut and wheel bolts to Kia/Mazda service manual specifications for the respective chassis.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
