Wheel Bearing Kits VKBA7440 For Honda
The DUHUI Bearing VKBA7440 is a complete front wheel bearing kit designed for Honda CR-V IV (RM) models from 2012 onward. This comprehensive kit includes one bearing, one circlip, and one retaining nut – all components required for a full front hub replacement. It matches Honda OE specifications including 44300-SJK-J01, 44300-SWW-E01, 44300-T0A-951, 44300-T1G-A01, 44300-SHJ-A51, and 44300-T0G-951, and is directly interchangeable with SKF VKBA7440, SNR R174.45, and FAG 713617910. It serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable front wheel bearing solution for these Honda applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK906 |
| Part Number | VKBA7440 |
| Product Type | Wheel Bearing Kit – Front Hub |
| Fitting Position | Front Axle |
| Kit Contents | Bearing x 1 + Circlip x 1 + Nut x 1 |
| Inner Diameter | 38.00 mm (1.496 inch) |
| Outer Diameter | 72.00 mm (2.835 inch) |
| Width | 38.00 mm (1.496 inch) |
| Flange Diameter | 131.00 mm (5.157 inch) |
| Rim Hole Number | 5 |
Note: Dimensional data is based on manufacturer published specifications. This is a front wheel bearing kit designed for Honda CR-V IV applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK906
OE Numbers:
HONDA: 44300-SJK-J01, 44300-SWW-E01, 44300-T0A-951, 44300-T1G-A01, 44300-SHJ-A51, 44300-T0G-951
Reference Numbers (Interchange):
SKF: VKBA7440
SNR: R174.45
FAG: 713617910
Vehicle Fitment
HONDA CR-V IV (RM): 2012 onward
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes bearing, circlip, and retaining nut – all necessary components for a full hub replacement.
- Specifically engineered for Honda CR-V IV (RM) front axle applications.
- Kit-based design simplifies the ordering process – no need to source individual components separately.
- Direct interchange with multiple major brand equivalents including SKF VKBA7440, SNR R174.45, and FAG 713617910.
- Manufactured to OE specifications for reliable performance and long service life.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Verify the kit contents match your original parts before installation (bearing x 1 + circlip x 1 + nut x 1).
- Confirm the kit is designed for front axle fitment on Honda CR-V IV (RM) models – ensure compatibility with your specific chassis variant.
- Inspect the hub surface and axle shaft for damage or wear before installing new components.
- When installing the new bearing, apply even pressure to the outer ring when pressing into the hub housing.
- Torque the retaining nut and wheel nuts to Honda service manual specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
