VKBA6692 Wheel Bearing Kits For LAND ROVER ROVER
The DUHUI Bearing VKBA6692 is a complete wheel bearing kit designed for Land Rover Freelander and Rover 75 models. This comprehensive kit includes one bearing, one circlip, and one retaining nut – all components required for a full hub replacement on either front or rear axle. It matches Land Rover and Rover OE specifications and is directly interchangeable with SKF VKBA6692. It serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable wheel bearing solution for these Land Rover and Rover applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK730 |
| Part Number | VKBA6692 |
| Product Type | Wheel Bearing Kit – Front & Rear Hub |
| Fitting Position | Front Axle / Rear Axle |
| Kit Contents | Bearing x 1 + Circlip x 1 + Nut x 1 |
Note: Dimensional data is based on available sources. This kit is suitable for both front and rear axle applications on Land Rover Freelander and Rover 75. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK730
OE Numbers:
LAND ROVER / ROVER: (Please verify OE number against your original part)
Reference Numbers (Interchange):
SKF: VKBA6692
Vehicle Fitment
LAND ROVER FREELANDER 2 (L359): 2.0 Si4 4×4 – 2011-2014
LAND ROVER FREELANDER I (L314): 1.8 16V 4×4 – 1998-2006; 1.8 Soft Top 4×4 – 2000-2006
ROVER 75 (RJ): 1.8 – 1999-2005; 1.8 Tourer – 2001-2005; 2.0 V6 Tourer – 2001-2005
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel bearing kit includes bearing, circlip, and retaining nut – all necessary components for a full hub replacement on either front or rear axle.
- Specifically engineered for Land Rover Freelander and Rover 75 applications – suitable for both front and rear fitment.
- Kit-based design simplifies the ordering process – no need to source individual components separately.
- Direct interchange with SKF VKBA6692.
- Manufactured to OE specifications for reliable performance and long service life.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Verify the kit contents match your original parts before installation (bearing x 1 + circlip x 1 + nut x 1).
- Confirm the kit is suitable for either front or rear axle fitment on your specific Land Rover Freelander or Rover 75 model – check your chassis code and year.
- Inspect the hub surface and axle shaft for damage or wear before installing new components.
- When installing the new bearing, apply even pressure to the outer ring when pressing into the hub housing.
- Torque the retaining nut and wheel nuts to the vehicle manufacturer’s service manual specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
