VKBA3620 Wheel Bearing Kits For FIAT
The DUHUI Bearing VKBA3620 is a complete wheel bearing kit designed for Fiat Croma (194) models with 1.9 D Multijet engines from 2005 to 2011. This comprehensive kit includes a pre-assembled hub unit, one cap, one retaining nut, and three cover bolts – all components required for a full hub replacement on either front or rear axle. It matches Fiat OE specifications including 51748680, 93186387, and 1603243, and is directly interchangeable with SKF VKBA3620, SNR R153.40, and FAG 713644090. It serves as a direct replacement for workshops, distributors, and B2B buyers requiring a reliable wheel bearing solution for these Fiat applications.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DBK431 |
| Part Number | VKBA3620 |
| Product Type | Wheel Bearing Kit – Front & Rear Hub Assembly |
| Fitting Position | Front Axle / Rear Axle |
| Kit Contents | Hub Unit x 1 + Cap x 1 + Nut x 1 + Cover Bolts x 3 |
Note: Dimensional data is based on manufacturer published specifications. This kit includes a cap and three cover bolts for a complete hub replacement on either front or rear axle. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK431
OE Numbers:
FIAT: VKBA3620, R153.40, 713644090, 51748680, 93186387, 1603243
Reference Numbers (Interchange):
SKF: VKBA3620
SNR: R153.40
FAG: 713644090
Vehicle Fitment
FIAT CROMA (194): 1.9 D Multijet (194AXC1B, 194AXC12) – 2005-2011
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete hub assembly includes hub unit, cap, retaining nut, and three cover bolts – all necessary components for a full hub replacement on either front or rear axle.
- Specifically engineered for Fiat Croma applications – suitable for both front and rear fitment.
- Pre-assembled hub unit simplifies installation – eliminates the need for complex bearing adjustment or separate component sourcing.
- Kit includes all hardware – no need to source cap, nut, or cover bolts separately.
- Direct interchange with multiple major brand equivalents including SKF VKBA3620, SNR R153.40, and FAG 713644090.
- Manufactured to OE specifications for reliable performance and long service life.
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging.
Installation Notes
- Verify the kit contents match your original parts before installation (hub unit x 1 + cap x 1 + nut x 1 + cover bolts x 3).
- Confirm the kit is suitable for either front or rear axle fitment on Fiat Croma models – check your specific chassis variant.
- Inspect the hub surface and axle shaft for damage or wear before installing new components.
- Replace the cap and cover bolts with the new ones supplied in the kit – do not reuse old components.
- Torque the retaining nut, cover bolts, and wheel nuts to Fiat service manual specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
