VKBA940 Wheel Bearing Kits For FIAT
The DUHUI Bearing VKBA940 is a complete rear wheel bearing kit designed for FIAT CINQUECENTO models from 1991 to 1999 [citation:12]. This comprehensive kit includes one hub, one cap, and one retaining nut, matching FIAT OE specifications 7603485, 4379767, and SE127149002A. It is directly interchangeable with SKF VKBA940 and SNR R158.17.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK1002 |
| Part Number | VKBA940 |
| Inner Diameter | 30.00 mm (1.181 inch) |
| Outer Diameter | 117.00 mm (4.606 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Rear Axle |
| Kit Contents | Hub x1, Cap x1, Nut x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for FIAT CINQUECENTO and related applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK1002
OE Numbers: 7603485, 4379767, 5948422, 7599461, SE127149002A, SE021149002A
Reference Numbers (Interchange):
SKF: VKBA940
SNR: R158.17
MAPCO: 26011
SPIDAN: 26511
QUINTON HAZELL: QWB244
METZGER: WM673
PEX: 160062
Vehicle Fitment
FIAT: CINQUECENTO (170_) 0.9 i.e. S (170AF, 170CF) – 1991-1999, CINQUECENTO (170_) 1.1 Sporting (170AH) – 1994-1998, PANDA (141_) 750 – 1986-2003, PANDA (141_) 1000 i.e. Cat – 1987-2003, PANDA (141_) 1000 4×4 – 1986-1992, SEICENTO / 600 (187_) 0.9 – 1997-2008, SEICENTO / 600 (187_) 1.1 – 1998-2010
LANCIA: DELTA II (836_) 1.6 i.e. – 1996-1999
SEAT: 127 – 1972-1982, 128 – 1976-1980
ABARTH: RITMO 125 TC 2.0 – 1983-1987, RITMO 130 TC 2.0 – 1983-1987
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes hub, cap, and retaining nut – all components for a full hub replacement
- Specifically engineered for FIAT CINQUECENTO, PANDA, and SEICENTO rear axle applications
- Direct interchange with SKF VKBA940, SNR R158.17, and MAPCO 26011
- Hub assembly design simplifies installation and eliminates the need for bearing pressing
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – hub x1, cap x1, and nut x1
- Confirm rear axle fitment for your specific FIAT or Lancia model variant
- Clean the stub axle surface thoroughly before fitting the new hub assembly
- Torque the retaining nut to FIAT service manual specifications – over-tightening can damage the bearing
- Inspect the brake backing plate for clearance after installation
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
