70081C3 Wheel Bearing For ISUZU
The DUHUI Bearing 70081C3 wheel bearing is a single-row cylindrical roller bearing designed for Isuzu automotive transmission and drivetrain applications. With a 22 mm bore, 50 mm outer diameter, and 14 mm width, this bearing is engineered to support high radial loads while accommodating axial displacement. It matches Isuzu OE specification 70081C3 and is cross-referenced with Fersa 70081C3.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2598 |
| Part Number | 70081C3 |
| Product Type | Cylindrical Roller Bearing – Single Row |
| Bore Diameter (d) | 22.00 mm (0.866 inch) |
| Outer Diameter (D) | 50.00 mm (1.969 inch) |
| Width (B) | 14.00 mm (0.551 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 0.11 kg (0.24 lb) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2598
OE Numbers:
70081C3
Reference Numbers (Interchange):
Fersa: 70081C3
Vehicle Fitment
ISUZU: Various automotive models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Cylindrical roller design with line contact between rollers and raceways – delivers high radial load capacity and low friction in transmission and drivetrain applications.
- Metric-series configuration with 22 mm bore and 50 mm outer diameter matches Isuzu OE 70081C3 specifications for direct replacement.
- Heat-treated GCr15 bearing steel construction – precision-ground raceways for consistent performance and long service life.
- Open-type design supports splash lubrication and oil bath systems common in transmission applications.
- Cross-referenced with Fersa 70081C3 – confirmed interchange available.
Installation Notes
- Confirm bore diameter (22.00 mm) and outer diameter (50.00 mm) match your housing and shaft before installation.
- Inspect the shaft and housing for wear, scoring, or pitting – replace if damage is present.
- Apply appropriate lubricant (oil or grease) during installation – refer to your equipment manual for viscosity specifications.
- Ensure correct shaft and housing tolerances for optimal load distribution and service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces cylindrical roller bearings and automotive components to OE specifications. Contact us
