62/22-2RS/C3 Wheel Bearing For KIA
The DUHUI Bearing 62/22-2RS/C3 wheel bearing is a sealed deep groove ball bearing with a 22 mm bore, 50 mm outer diameter, and 14 mm width. Designed for automotive applications requiring low friction and high-speed capability, this bearing features integral seals on both sides to protect against contamination. It matches Kia OE specification MB50117171 and is cross-referenced with Fersa 62/22 2RS/C3.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2597 |
| Part Number | 62/22-2RS/C3 |
| Product Type | Deep Groove Ball Bearing – Sealed |
| Bore Diameter (d) | 22.00 mm (0.866 inch) |
| Outer Diameter (D) | 50.00 mm (1.969 inch) |
| Width (B) | 14.00 mm (0.551 inch) |
| Enclosure | 2RS – Contact Seals Both Sides |
| Radial Internal Clearance | C3 (Greater than Normal) |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 0.11 kg (0.24 lb) |
Note: Dimensional data is based on manufacturer published specifications for the 62/22-2RS/C3 series. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2597
OE Numbers:
MB50117171
Reference Numbers (Interchange):
Fersa: 62/22 2RS/C3
SKF: 62/22-2RS/C3
Vehicle Fitment
KIA: Various models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Deep groove ball design accommodates radial and moderate axial loads – suitable for automotive wheel hub and pulley applications.
- 2RS contact seals on both sides provide effective contamination protection – retains lubricant and excludes dirt and moisture.
- C3 radial internal clearance accommodates thermal expansion in higher-temperature operating conditions.
- Metric configuration with 22 mm bore and 50 mm outer diameter matches Kia OE MB50117171 and Fersa equivalents for direct replacement.
- Heat-treated bearing steel with precision-ground raceways – constructed from GCr15 chrome steel for consistent performance and long service life.
Installation Notes
- Confirm bore diameter (22.00 mm) and outer diameter (50.00 mm) match your housing and shaft before installation.
- This is a sealed bearing – do not wash or re-lubricate before installation as the factory-fill grease is pre-installed.
- Inspect the shaft and housing for wear or damage – replace if scoring or pitting is present.
- Press the bearing squarely into the housing or onto the shaft – never apply force directly through the rolling elements.
- Torque all fasteners to vehicle manufacturer specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
