VKBA6966 Wheel Bearing Kits For DAIHATSU
The DUHUI Bearing VKBA6966 is a complete rear wheel bearing kit designed for Daihatsu Applause models from 1989 to 1997. This comprehensive kit includes one bearing, one circlip, one split pin, and one retaining nut, matching OE specifications including 90043-63150 and 90043-63361. It is directly interchangeable with SKF VKBA6966, SNR R179.19, FAG 713616920, and OPTIMAL 901429.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK1035 |
| Part Number | VKBA6966 |
| Inside Diameter | 35.00 mm (1.378 inch) |
| Outside Diameter | 64.00 mm (2.520 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Rear Axle |
| Kit Contents | Bearing x1, Circlip x1, Split Pin x1, Nut x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Daihatsu Applause applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK1035
OE Numbers: 90043-63150, 90043-63253, 90043-63361, 43560-B1020, 90043-63151
Reference Numbers (Interchange):
SKF: VKBA6966
SNR: R179.19
FAG: 713616920
OPTIMAL: 901429
RUVILLE: 7920
SPIDAN: 27016
TIMKEN: 510014
KOYO: DAC3564A-1CS31
NTN: AU0704-2LLX2/L588
Vehicle Fitment
DAIHATSU: APPLAUSE I Hatchback (A101, A111) – 1989-1997
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes bearing, circlip, split pin, and retaining nut – all components for a full bearing replacement
- Specifically engineered for Daihatsu Applause rear axle applications
- Direct interchange with SKF VKBA6966 and multiple major brands
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, circlip x1, split pin x1, and nut x1
- Confirm rear axle fitment for your specific Daihatsu Applause model year (1989-1997)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip and split pin supplied – do not reuse old retaining hardware
- Torque the retaining nut to Daihatsu service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
