VKBA6828 Wheel Bearing Kits For DAIHATSU
The DUHUI Bearing VKBA6828 is a complete rear wheel bearing kit designed for Daihatsu Charade models from 2011 onward. This kit includes one hub assembly, matching OE specifications including 424500D050 and 713618990. It is directly interchangeable with SKF VKBA6828 and SNR R169.76.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK780 |
| Part Number | VKBA6828 |
| Flange Diameter | 119.00 mm (4.685 inch) |
| Wheel Stud Quantity | 4 |
| Position | Rear Axle |
| ABS Sensor | Integrated |
| Kit Contents | Hub x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Daihatsu Charade applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK780
OE Numbers: 424500D050, 4245052060, 713618990, 424500D060, 4245452020, 4320252040
Reference Numbers (Interchange):
SKF: VKBA6828
SNR: R169.76
FAG: 713618990
TOYOTA: 42450-0D050, 42450-52060, 42450-0D060
BLUE PRINT: ADD68238
Vehicle Fitment
DAIHATSU: CHARADE VIII 1.33 16V – 2011 onward
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear hub assembly with integrated ABS sensor for plug-and-play compatibility
- Specifically engineered for Daihatsu Charade VIII rear axle applications
- Direct interchange with SKF VKBA6828 and SNR R169.76
- Pre-assembled hub design eliminates the need for a shop press during installation
- Pre-loaded bearing with factory-set preload for consistent performance
- Multi-lip seal design provides contamination protection and retains lubricant
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – hub x1
- Confirm rear axle fitment for your specific Daihatsu Charade model year (2011 onward)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new assembly
- Torque the four flange bolts to Daihatsu service manual specifications
- After installation, verify the ABS sensor electrical connector is secure and the warning light clears
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
