HK223112 Wheel Bearing For JAGUAR
The DUHUI Bearing HK223112 needle roller bearing is a single-row radial bearing designed for automotive drivetrain and wheel hub applications. With a 34.925 mm bore, 76.2 mm outer diameter, and 29.37 mm width, this bearing is engineered to support high radial loads in compact spaces. It matches Jaguar OE specification HK223112 and is cross-referenced with SKF, NTN, and INA equivalents.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB3721 |
| Part Number | HK223112 |
| Product Type | Needle Roller Bearing – Single Row, Drawn Cup |
| Bore Diameter (d) | 34.93 mm (1.375 inch) |
| Outer Diameter (D) | 76.20 mm (3.000 inch) |
| Width (B) | 29.37 mm (1.157 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 0.64 kg (1.41 lb) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB3721
OE Numbers:
HK223112
Reference Numbers (Interchange):
JAGUAR: HK223112
SKF: HK223112
NTN: HK223112
INA: HK223112
Vehicle Fitment
JAGUAR: Various models (verify OE number and dimensions before ordering)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Drawn cup needle roller design with rollers multiple times longer than their diameter – provides high radial load capacity in a compact cross-section while reducing friction.
- Metric/Inch hybrid configuration with 34.925 mm bore and 76.2 mm outer diameter matches Jaguar OE HK223112 for direct replacement.
- Heat-treated GCr15 bearing steel construction – precision-ground raceways for consistent performance and long service life.
- Open-type design supports splash lubrication and oil bath systems common in drivetrain applications.
- Cross-referenced with SKF, NTN, and INA equivalents – confirmed interchange available.
Installation Notes
- Confirm bore diameter (34.925 mm) and outer diameter (76.20 mm) match your housing and shaft before installation.
- Inspect the shaft and housing for wear, scoring, or pitting – replace if damage is present.
- Apply appropriate lubricant (oil or grease) during installation – refer to your equipment manual for viscosity specifications.
- Ensure correct shaft and housing tolerances for optimal load distribution and service life.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces needle roller bearings and automotive components to OE specifications. Contact us
