VKBA1931 Wheel Bearing Kits For DAEWOO
The DUHUI Bearing VKBA1931 is a complete wheel bearing kit designed for Daewoo Tico models from 1995 to 2000. This comprehensive kit includes two bearings and one split pin, matching OE specifications including 46840M79010 and 46850M79010. It is directly interchangeable with SKF VKBA1931, SNR R177.08, and FAG 713623120.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK136 |
| Part Number | VKBA1931 |
| Inside Diameter | 30.00 mm (1.181 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Front and Rear Axle |
| Kit Contents | Bearing x2, Split Pin x1 |
Note: Dimensional data is based on available sources. This is a wheel bearing kit designed for Daewoo Tico applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK136
OE Numbers: 46840M79010, 46850M79010, 46860M60D10, 96285136
Reference Numbers (Interchange):
SKF: VKBA1931
SNR: R177.08
FAG: 713623120
BRT: BRT1931
SUZUKI: 46840M79010, 46850M79010
BLUE PRINT: ADD67919
Vehicle Fitment
DAEWOO: TICO (KLY3) 0.8 – 1995-2000
SUZUKI: ALTO (SB308) 0.8 – 1996-2002
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel bearing kit includes two bearings and split pin – all components for front and rear bearing replacement
- Specifically engineered for Daewoo Tico and Suzuki Alto applications
- Direct interchange with SKF VKBA1931, SNR R177.08, and FAG 713623120
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- Split pin included for secure retaining nut locking
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x2 and split pin x1
- Confirm axle fitment for your specific Daewoo Tico model (1995-2000)
- Clean the stub axle and hub mounting surfaces thoroughly before fitting new components
- Use the new split pin supplied – do not reuse old retaining hardware
- Torque the retaining nut to Daewoo service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
