VKBA3639 Wheel Bearing Kits For DACIA
The DUHUI Bearing VKBA3639 is a complete rear wheel bearing kit designed for Dacia Sandero models from 2019 onward. This comprehensive kit includes one bearing, one nut, one circlip, and one cap, matching OE specifications including 7701208058 and 7701209504. It is directly interchangeable with SKF VKBA3639, SNR R155.77, and FAG 713630950.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK444 |
| Part Number | VKBA3639 |
| Inside Diameter | 25.00 mm (0.984 inch) |
| Outside Diameter | 55.00 mm (2.165 inch) |
| Width | 45.00 mm (1.772 inch) |
| Position | Rear Axle |
| Kit Contents | Bearing x1, Nut x1, Circlip x1, Cap x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Dacia Sandero applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK444
OE Numbers: 7701208058, 7701209504, 8200645712
Reference Numbers (Interchange):
SKF: VKBA3639
SNR: R155.77
FAG: 713630950
RUVILLE: 5577
BLUE PRINT: ADN18366
DELPHI: BK1408
QUINTON HAZELL: QWB1256, BK101256
OPTIMAL: 702982
SPIDAN: 27326
FEBI BILSTEIN: 24780
Vehicle Fitment
DACIA: SANDERO II 1.0 LPG (B8ML) – 2019 onward
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes bearing, nut, circlip, and cap – all components for a full bearing replacement
- Specifically engineered for Dacia Sandero II rear axle applications
- Direct interchange with SKF VKBA3639, SNR R155.77, and FAG 713630950
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, nut x1, circlip x1, and cap x1
- Confirm rear axle fitment for your specific Dacia Sandero II model (2019 onward)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip and nut supplied – do not reuse old retaining hardware
- Torque the retaining nut to Dacia service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
