VKBA7000 Wheel Bearing Kits For DACIA
The DUHUI Bearing VKBA7000 is a complete rear wheel bearing kit designed for Dacia Duster models from 2015 to 2018. This kit includes one bearing, one nut, and one circlip, matching OE specifications including 402109533R. It is directly interchangeable with SKF VKBA7000, SNR R155.114, and FAG 713631180.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK870 |
| Part Number | VKBA7000 |
| Inside Diameter | 25.00 mm (0.984 inch) |
| Outside Diameter | 52.00 mm (2.047 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Rear Axle |
| Kit Contents | Bearing x1, Nut x1, Circlip x1 |
Note: Dimensional data is based on available sources. This is a rear wheel bearing kit designed for Dacia Duster applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK870
OE Numbers: 402109533R, 7701208075, 7701208076
Reference Numbers (Interchange):
SKF: VKBA7000
SNR: R155.114
FAG: 713631180
FEBI BILSTEIN: 24782
BLUE PRINT: ADN18367
RUVILLE: 5583
OPTIMAL: 702988
Vehicle Fitment
DACIA: DUSTER (HS_) 1.2 TCe 125 4×4 – 2015-2018, DUSTER (HS_) 1.5 dCi 4×4 – 2012-2018, DUSTER (HS_) 1.6 16V 4×4 – 2012-2018
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete rear wheel bearing kit includes bearing, nut, and circlip – all components for a full bearing replacement
- Specifically engineered for Dacia Duster rear axle applications
- Direct interchange with SKF VKBA7000, SNR R155.114, and FAG 713631180
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, nut x1, and circlip x1
- Confirm rear axle fitment for your specific Dacia Duster model (2015-2018)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip and nut supplied – do not reuse old retaining hardware
- Torque the retaining nut to Dacia service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
