Universal Joint 4606993 For FIAT
The DUHUI Universal Joint 4606993 is a precision-engineered driveline component designed for FIAT Panda 4×4 models from 1986 to 2004. This universal joint features a structural diameter of 24 mm and an overall length of 62 mm, matching OE specifications including 4606993, 4593224, and 5959654. It is directly interchangeable with major brands including GKN and Spicer.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 4606993 |
| Structural Diameter | 24.00 mm (0.945 inch) |
| Overall Length | 62.00 mm (2.441 inch) |
| Diameter 2 | 13.00 mm (0.512 inch) |
| Weight | 275 g (0.61 lbs) |
| Position | Rear |
| Product Type | Universal Joint / Cross Bearing |
Note: Dimensional data is based on available sources. This is a universal joint designed for FIAT Panda applications. Please verify measurements against your original part before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 4606993, 4593224, 5959654
Reference Numbers (Interchange):
FIAT: 4606993, 4593224, 5959654
LÖBRO: 303668
BRT: BRT830
MAGNETI MARELLI: 270202
Vehicle Fitment
FIAT: PANDA (141_) 1000 4×4 – 1986-1994, PANDA (141_) 1000 4×4 – 1986-1992, PANDA Hatchback Van (141_) 1.1 – 1991-1995, PANDA Hatchback Van (141_) 1.1 4×4 – 2000-2004
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Universal joint / cross bearing specifically designed for FIAT Panda 4×4 driveline applications
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- 24 mm structural diameter with 62 mm overall length
- Direct interchange with OE numbers 4606993, 4593224, and 5959654
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify dimensions (structural diameter 24 mm, overall length 62 mm) against your original universal joint
- Confirm fitment for your specific FIAT Panda model and drivetrain configuration
- Clean the yoke and mating surfaces thoroughly before installation
- Apply appropriate grease to the bearing cups during installation
- Torque the retaining bolts to FIAT service manual specifications
- After installation, check for smooth rotation without binding
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces universal joints and automotive components to OE specifications. Contact us
