VKBA3907 Wheel Bearing Kits For HYUNDAI
The DUHUI Bearing VKBA3907 is a complete front wheel bearing kit designed for Hyundai Santamo models from 1999 to 2002. This kit includes one bearing, one circlip, and one split pin, matching OE specifications including 5171829100 and 5172002000. It is directly interchangeable with SKF VKBA3907, SNR R184.05, and FAG 713619510.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK538 |
| Part Number | VKBA3907 |
| Inside Diameter | 37.00 mm (1.457 inch) |
| Outside Diameter | 68.00 mm (2.677 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Front Axle |
| Kit Contents | Bearing x1, Circlip x1, Split Pin x1 |
Note: Dimensional data is based on available sources. This is a front wheel bearing kit designed for Hyundai Santamo applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK538
OE Numbers: 5171829100, 5172002000, 517201C000, 5172025000, 5172029100, 5172029300
Reference Numbers (Interchange):
SKF: VKBA3907
SNR: R184.05
FAG: 713619510
BRT: BRT3907
RUVILLE: 5526
BLUE PRINT: ADG08350
Vehicle Fitment
HYUNDAI: SANTAMO 2.0 16V – 1999-2002
KIA: CARENS (FJ) 2.0 – 1999-2002
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes bearing, circlip, and split pin – all components for a full bearing replacement
- Specifically engineered for Hyundai Santamo and Kia Carens front axle applications
- Direct interchange with SKF VKBA3907, SNR R184.05, and FAG 713619510
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1, circlip x1, and split pin x1
- Confirm front axle fitment for your specific Hyundai Santamo model (1999-2002)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip and split pin supplied – do not reuse old retaining hardware
- Torque the retaining nut to Hyundai service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
