VKBA3906 Wheel Bearing Kits For HYUNDAI
The DUHUI Bearing VKBA3906 is a complete front wheel bearing kit designed for Hyundai Santamo models from 1999 to 2002. This kit includes one bearing and one circlip, matching OE specifications including 5171836000 and 5172034000. It is directly interchangeable with SKF VKBA3906, SNR R184.06, and FAG 713619500.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK537 |
| Part Number | VKBA3906 |
| Inside Diameter | 37.00 mm (1.457 inch) |
| Outside Diameter | 68.00 mm (2.677 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Front Axle |
| Kit Contents | Bearing x1, Circlip x1 |
Note: Dimensional data is based on available sources. This is a front wheel bearing kit designed for Hyundai Santamo applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK537
OE Numbers: 5171836000, 5172034000, 5172034100, 5172034200, 51731M2000, 51720M2000, 5171336000
Reference Numbers (Interchange):
SKF: VKBA3906
SNR: R184.06
FAG: 713619500
BRT: BRT3906
RUVILLE: 5525
BLUE PRINT: ADG08349
Vehicle Fitment
HYUNDAI: SANTAMO 2.0 16V – 1999-2002
KIA: CARENS (FJ) 2.0 – 1999-2002
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete front wheel bearing kit includes bearing and circlip – all components for a full bearing replacement
- Specifically engineered for Hyundai Santamo and Kia Carens front axle applications
- Direct interchange with SKF VKBA3906, SNR R184.06, and FAG 713619500
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x1 and circlip x1
- Confirm front axle fitment for your specific Hyundai Santamo model (1999-2002)
- Clean the stub axle and hub mounting surface thoroughly before fitting the new bearing
- Use the new circlip supplied – do not reuse the old retaining ring
- Torque the retaining nut to Hyundai service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
