VKBA3792 Wheel Bearing Kits For HYUNDAI
The DUHUI Bearing VKBA3792 is a complete wheel bearing kit designed for Hyundai Atos models from 1998 to 2000. This comprehensive kit includes two bearings, one oil seal, and one split pin, matching OE specifications including 311405625 and 922187. It is directly interchangeable with SKF VKBA3792, SNR R184.33, and FAG 713619100.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DBK526 |
| Part Number | VKBA3792 |
| Inside Diameter | 30.00 mm (1.181 inch) |
| Outside Diameter | 62.00 mm (2.441 inch) |
| Width | 37.00 mm (1.457 inch) |
| Position | Front and Rear Axle |
| Kit Contents | Bearing x2, Oil Seal x1, Split Pin x1 |
Note: Dimensional data is based on available sources. This is a wheel bearing kit designed for Hyundai Atos applications. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DBK526
OE Numbers: 311405625, 922187, J4705002
Reference Numbers (Interchange):
SKF: VKBA3792
SNR: R184.33
FAG: 713619100
BRT: BRT3792
RUVILLE: 26636
SPIDAN: 27263
NIPPARTS: J4705002
Vehicle Fitment
HYUNDAI: ATOS (MX) 1.0 i GLS – 1998-2000
KIA: AVANZA (MX) 1.0 – 1998-2000
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Complete wheel bearing kit includes two bearings, oil seal, and split pin – all components for a full bearing replacement
- Specifically engineered for Hyundai Atos and Kia Avanza applications
- Direct interchange with SKF VKBA3792, SNR R184.33, and FAG 713619100
- Precision-ground bearing surfaces for smooth operation and reduced vibration
- Oil seal included to prevent contaminant ingress and retain lubricant
- All necessary installation hardware included – no additional parts required
- Manufactured to OE specifications for reliable performance and service life
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the kit contents match your original parts before installation – bearing x2, oil seal x1, and split pin x1
- Confirm axle fitment for your specific Hyundai Atos model (1998-2000)
- Clean the stub axle and hub mounting surfaces thoroughly before fitting new components
- Install the oil seal with the correct orientation to prevent leaks
- Use the new split pin supplied – do not reuse old retaining hardware
- Torque the retaining nut to Hyundai service manual specifications
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearing kits and automotive components to OE specifications. Contact us
