803149/10 Wheel Bearing For TOYOTA
The DUHUI Bearing 803149/10 wheel bearing is a single-row tapered roller bearing designed for front wheel hub applications on compatible Toyota Hilux and Fortuner 4×4 models. With a 42 mm inner diameter, 80 mm outer diameter, and 40 mm width, this bearing supports combined radial and axial loads in demanding off-road and commercial vehicle applications. It matches Toyota OE specifications 90366F0001 and 90366T0060, with cross-references to SKF VKBA7794 and VKBA7795, FAG 713621440, and GSP GKX0065. This bearing is specifically fitted to Hilux VIII (2015-) and Fortuner (_N15_, _N16_) 4×4 models.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWB2509 |
| Part Number | 803149/10 |
| Product Type | Tapered Roller Bearing – Single Row |
| Inner Diameter (d) | 42.00 mm (1.654 inch) |
| Outer Diameter (D) | 80.00 mm (3.150 inch) |
| Width (B) | 40.00 mm (1.575 inch) |
| Material | High Carbon Chrome Steel (GCr15) |
| Weight | 0.92 kg (2.03 lb) |
Note: Dimensional data is based on manufacturer published specifications. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWB2509
OE Numbers:
90366F0001, 90366T0060
Reference Numbers (Interchange):
SKF: VKBA7794, VKBA7795
FAG: 713621440
GSP: GKX0065
FEBEST: DAC42820040M
AUTOKIT: 01.98340
A.B.S.: 201921
OPTIMAL: 982702
RUVILLE: 221948
Vehicle Fitment
TOYOTA HILUX VIII Pickup (_N1_): 2015-2024 (2.4 D, GUN112/GUN122/GUN135/GUN120)
TOYOTA FORTUNER (_N15_, _N16_): 2015- (2.4 D, 2.8 D, 2.7 4×4)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Single-row tapered roller design supports combined radial and axial loads in one direction – suitable for heavy-duty front wheel hub applications on Toyota 4×4 vehicles.
- Metric-series configuration with 42 mm bore and 80 mm outer diameter matches Toyota OE 90366F0001 and 90366T0060 for direct replacement.
- Separable cup and cone construction simplifies installation and maintenance – inner ring with roller assembly can be mounted independently.
- Heat-treated GCr15 bearing steel with precision-ground raceways ensures consistent load distribution and wear resistance in demanding off-road and commercial applications.
- Cross-referenced with major aftermarket brands including SKF VKBA7794, FAG 713621440, and GSP GKX0065 – confirmed interchange available.
Installation Notes
- Confirm inner diameter (42.00 mm) and outer diameter (80.00 mm) match your existing bearing and housing before installation.
- Inspect the hub surface and axle shaft for wear or damage before installing new components.
- Set bearing preload according to Toyota service manual specifications – tapered rollers require proper adjustment for front hub operation.
- Lubricate with high-quality wheel bearing grease – refer to the Toyota service manual for viscosity grade and lubrication method.
- When replacing on Hilux VIII or Fortuner 4×4 models, verify the specific chassis and engine code for compatibility.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel bearings and automotive components to OE specifications. Contact us
