2N0598611A Wheel Hub Bearing For MAN
The DUHUI 2N0598611A wheel hub bearing is a direct-fit front axle replacement designed for MAN TGE commercial vehicle applications. This front wheel hub bearing meets OE specifications 2N0598611 and 2N0598611A, delivering reliable performance in the aftermarket. It features a 4-bolt flange design with an integrated 96-tooth ABS ring for seamless compatibility with vehicle safety systems .
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01510 |
| Part Number | 2N0598611A |
| Position | Front Axle |
| Outer Diameter 1 | 148.00 mm (5.827 inch) |
| Height 1 | 105.00 mm (4.134 inch) |
| Bolt Circle Diameter | 114.00 mm (4.488 inch) |
| Bolt Holes | 4 |
| Connector Flange Count | 4 |
| ABS Ring Teeth | 96 |
| Thread Size | M12 x 1.25 |
| Weight | 3.18 kg (7.01 lbs) |
| ABS Sensor | Equipped |
Note: This front wheel hub bearing features a 4-bolt flange with 114mm bolt circle and an integrated 96-tooth ABS ring. It is suitable for both 2WD and AWD configurations . Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01510
OE Numbers: 2N0598611A, 2N0598611
Reference Numbers (Interchange):
MAN: 2N0598611A, 2N0598611
Vehicle Fitment
MAN: TGE Bus 2.0 TDI (2017-2024), TGE Bus 2.0 TDI AWD (2017-present), TGE Platform/Chassis (UZ) 2.0 TDI (2016-present)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front wheel hub bearing engineered for MAN TGE commercial vehicle applications
- Integrated 96-tooth ABS tone ring for precise wheel speed detection and seamless ABS compatibility
- 4-bolt flange design with 114mm bolt circle for secure fitment
- 4-joint flange configuration provides enhanced stability for commercial vehicle loads
- Double-row bearing design delivers consistent performance under heavy-duty conditions
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE numbers 2N0598611A and 2N0598611 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number on your original bearing matches 2N0598611A or 2N0598611 before installation
- Confirm the 4-bolt flange with 114mm bolt circle matches your MAN TGE front hub
- This is an ABS-equipped hub assembly – confirm your vehicle has ABS before ordering
- Ensure the ABS sensor is properly aligned with the 96-tooth tone ring during installation
- This bearing suits both 2WD and AWD configurations, but verify your vehicle’s drive configuration matches
- Clean the hub mounting surface and steering knuckle thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to MAN service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
