ADT383116 Wheel Hub Bearing For Lexus
The DUHUI ADT383116 wheel hub bearing is a direct-fit rear axle replacement designed for Lexus RX (_L1_/_L2_) AWD models. This rear wheel hub bearing meets OE specification ADT383116, delivering reliable performance in the aftermarket. It features a 5-bolt flange design with an integrated 96-tooth ABS magnetic sensor ring for seamless compatibility with vehicle safety systems.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01508 |
| Part Number | ADT383116 |
| Position | Rear Axle |
| Drive Type | AWD |
| Outer Diameter 1 | 152.00 mm (5.984 inch) |
| Inner Diameter 1 | 28.50 mm (1.122 inch) |
| Width 1 | 105.90 mm (4.169 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Bolt Holes | 5 |
| Connector Flange Count | 4 |
| ABS Ring Teeth | 96 |
| Thread Size | M12 x 1.5 |
| Weight | 4.27 kg (9.41 lbs) |
| ABS Sensor | Equipped (with integrated magnetic sensor ring) |
Note: This rear wheel hub bearing features a 5-bolt flange with 114.3mm bolt circle and an integrated 96-tooth magnetic sensor ring. Please verify measurements against your original parts before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01508
OE Numbers: ADT383116
Reference Numbers (Interchange):
LEXUS: ADT383116
Vehicle Fitment
LEXUS: RX (_L1_) 350 AWD (GGL15_) (2008-2015)
LEXUS: RX (_L2_) 200t AWD (AGL25_) (2015-2017), RX (_L2_) 300 AWD (AGL25_, AGL25R) (2017-present), RX (_L2_) 350 4WD (GGL25_, GGL26_) (2015-present)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered for Lexus RX AWD applications
- Integrated 96-tooth magnetic sensor ring for precise wheel speed detection and seamless ABS compatibility
- 5-bolt flange design with 114.3mm bolt circle for enhanced load distribution
- 4-joint flange configuration provides enhanced stability
- Double-row bearing design delivers consistent performance under varying loads
- Factory-sealed and pre-lubricated – no routine maintenance required
- Precision-ground raceways reduce rolling resistance for improved efficiency
- Direct interchange with OE number ADT383116 for straightforward replacement
- Available for product customization – logo, code, pattern, or words can be applied to the bearing or packaging
Installation Notes
- Verify the OE number ADT383116 on your original bearing before installation
- Confirm rear axle AWD fitment for your specific Lexus RX model
- This is an ABS-equipped hub assembly – confirm your vehicle has ABS before ordering
- Ensure the magnetic sensor ring is properly aligned with the vehicle’s ABS sensor during installation
- Clean the hub mounting surface and axle shaft thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Lexus service manual specifications; over-torquing can shorten bearing life
- After installation, rotate the hub to check for smooth operation and verify ABS sensor function
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
