M113301210 Wheel Hub Bearing For CHERY
The DUHUI M113301210 wheel hub bearing is a direct-fit rear axle replacement designed for Chery A3 (M11 and M12) models from 2008 to 2013. This rear wheel hub bearing meets OE specifications M113301210 and DACF3213667, and features a 5-bolt flange with integrated 48-tooth ABS sensor ring for precise wheel speed signaling.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0860 |
| Part Number | M113301210 |
| Position | Rear Axle |
| Inner Diameter | 32.00 mm (1.260 inch) |
| Outer Diameter | 137.00 mm (5.394 inch) |
| Structural Height | 66.00 mm (2.598 inch) |
| Bolt Holes | 5 |
| Input Shaft Teeth | 48 |
| ABS Sensor | Included |
| Product Weight | 2.24 kg (4.93 lbs) |
Note: Dimensional data is based on available sources. Please verify measurements against your original bearing before ordering.
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0860
OE Numbers: M113301210, DACF3213667
Reference Numbers (Interchange):
CHERY: M113301210, DACF3213667
Vehicle Fitment
CHERY: A3 (M11, 2008-2013)
CHERY: A3 (M12, 2009-2013)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Rear wheel hub bearing engineered specifically for Chery A3 models
- 5-bolt flange design for secure wheel attachment
- Integrated 48-tooth ABS sensor ring for precise wheel speed signaling – compatible with factory ABS systems
- 48-spline input shaft for accurate drivetrain connection
- Precision roll-formed design ensures consistent and optimized factory-installed preload, minimizing excessive noise and wear
- Application-specific advanced raceway designs reduce stress, rotation and heat on components, extending service life
- Coated wheel bolts effectively prevent rust, ensuring smooth disassembly and accurate torque
- Manufactured in ISO/TS 16949 certified facilities with 100% product inspection
- Factory-sealed and pre-lubricated – no routine maintenance required
Installation Notes
- Verify the OE number on your original bearing matches M113301210 or DACF3213667 before installation
- Confirm rear axle fitment for your specific Chery A3 (M11 or M12) model (2008-2013)
- This bearing includes ABS sensor – verify your vehicle has ABS configuration
- Check 5-bolt flange pattern matches your vehicle’s hub
- Clean the hub mounting surface thoroughly before fitting the new assembly
- Use a proper hydraulic press or hub installer – do not strike the bearing directly with a hammer
- Torque the axle nut to Chery service manual specifications; over-torquing can shorten bearing life
- After installation, check ABS sensor clearance and rotate the hub to ensure smooth operation
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub bearings to OE specifications. Contact us
