Ordinary Release Bearing 500104800
The DUHUI 500104800 release bearing is an OE-replacement component designed for FIAT Ducato, PEUGEOT Boxer/605, and CITROEN Jumper models with 2.0 i, 2.5 D, and 2.5 Turbo Diesel engines from 1994 to 2002. This ordinary release bearing matches OE specifications including 2041.55 and cross-references with LUK 500104800 and SACHS 3151600524.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | 500104800 |
| Type | Ordinary (Mechanical) |
| Warranty | 2 years / 50,000 km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 2041.55, 2041.70, 9621805380
Reference Numbers (Interchange):
LUK: 500104800, 500104810
SACHS: 3151600524
Vehicle Fitment
FIAT: Ducato Platform/Chassis (230_) 2.5 D 4×4 1994-2002
PEUGEOT: 605 (6B) 2.5 Turbo Diesel 1994-1999
PEUGEOT: Boxer Bus (230P) 2.0 i 1994-2002
PEUGEOT: Boxer Van (230L) 2.0 i 1994-2002
CITROEN: Jumper I Bus (230P) 2.5 D 1994-2002
CITROEN: Jumper I Platform/Chassis (230) 2.5 D 1994-2002
CITROEN: Jumper I Van (230L) 2.5 D 1994-2002
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Ordinary (mechanical) release bearing designed for FIAT, PEUGEOT, and CITROEN clutch systems.
- OE-match design with multiple OE number interchange: 2041.55, 2041.70, and 9621805380.
- Cross-references with LUK 500104800 and SACHS 3151600524.
- Factory pre-lubricated for reliable clutch disengagement.
- 2-year / 50,000 km warranty for aftermarket assurance.
Installation Notes
- Inspect the guide sleeve and clutch fork for wear before installing the new release bearing.
- Clean the transmission input shaft and guide tube thoroughly before installation.
- Apply a light coat of high-temperature grease to the release bearing contact points per manufacturer specifications.
- Verify smooth sliding movement of the bearing on the guide tube before transmission reassembly.
- Torque the retaining bolts to manufacturer factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
