Ordinary Release Bearing VKC2542
The DUHUI VKC2542 release bearing is an OE-replacement component designed for FIAT, PEUGEOT, CITROEN, and LANCIA models with 2.0 HDi, 2.0 JTD, and 2.2 engines from 1999 to 2010. This ordinary release bearing matches OE specifications including 2041.58 and cross-references with SKF VKC2542, LUK 500076010, and SACHS 3151998301.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2542 |
| Type | Ordinary (Mechanical) |
| Warranty | 2 years / 50,000 km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 2041.58, 2041.62, 2041.66, 2041.69, 9625260580, 9632339180, 9619888580, 9635222580
Reference Numbers (Interchange):
SKF: VKC2542
LUK: 500076010, 500073230
SACHS: 3151998301
Vehicle Fitment
FIAT: Scudo Bus (220_) 2.0 JTD 1999-2006
FIAT: Scudo Platform/Chassis (220_) 2.0 JTD 2002-2006
FIAT: Ulysse (179_) 2.0 JTD 2003-2006
PEUGEOT: 406 (8B) 2.0 HDi 110 2001-2004
PEUGEOT: 406 Break (8E/F) 2.0 HDi 110 2001-2004
PEUGEOT: 406 Coupe (8C) 2.2 2002-2004
CITROEN: C8 Van (EA_, EB_) HDi 110 (EBRHTB) 2003-2009
CITROEN: C5 I (DC_) 2.0 HDi (DCRHZB, DCRHZE) 2001-2004
CITROEN: C5 I Break (DE_) 2.0 HDi (DERHSB, DERHSE) 2001-2004
LANCIA: Phedra (179_) 2.0 JTD (179.AXE1A) 2003-2010
LANCIA: Zeta (22_) 2.0 JTD (220.AR5, 220.AN5) 1999-2002
LANCIA: Zeta (22_) 2.0 JTD 16V (220.AR5OOL) 2001-2003
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Ordinary (mechanical) release bearing designed for FIAT, PEUGEOT, CITROEN, and LANCIA clutch systems.
- OE-match design with multiple OE number interchange including 2041.58 and 2041.62.
- Cross-references with SKF VKC2542, LUK 500076010, and SACHS 3151998301.
- Factory pre-lubricated for reliable clutch disengagement.
- 2-year / 50,000 km warranty for aftermarket assurance.
Installation Notes
- Inspect the guide sleeve and clutch fork for wear before installing the new release bearing.
- Clean the transmission input shaft and guide tube thoroughly before installation.
- Apply a light coat of high-temperature grease to the release bearing contact points per manufacturer specifications.
- Verify smooth sliding movement of the bearing on the guide tube before transmission reassembly.
- Torque the retaining bolts to manufacturer factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
