Ordinary Release Bearing VKC2108
The DUHUI VKC2108 release bearing is an OE-replacement component designed for CITROEN, PEUGEOT, RENAULT, and TALBOT models with 0.9 to 1.4 liter engines from 1973 to 1997. This ordinary release bearing matches OE specifications including 7910011860 and cross-references with SKF VKC2108, LUK 500001010, and SACHS 1850282628.
Specifications
| Parameter | Value |
|---|---|
| DH Code | |
| Part Number | VKC2108 |
| Type | Ordinary (Mechanical) |
| Warranty | 2 years / 50,000 km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
OE Numbers: 7910011860, 2041.31, 2041.22, 96034269, 95613501, 91537167, 91519468, 91512268, 7700689934, 7701348915, 7700625461
Reference Numbers (Interchange):
SKF: VKC2108
LUK: 500001010
SACHS: 1850282628, 3151842001
F-266518, I-R076, I-R075, I-R064, C0046/N, CR1124, HD1245, CCT262
Vehicle Fitment
CITROEN: BX (XB-_) 14 E 1985-1993
CITROEN: C15 Box Body/MPV (VD_) 1.0 1984-1997
CITROEN: LNA 1.0 1984-1986
PEUGEOT: 104 1.0 1983-1988
PEUGEOT: 104 Coupe 0.9 1973-1983
PEUGEOT: 205 Hatchback Van 1.1 1987-1990
RENAULT: 14 (121_) 1.2 (1210) 1976-1980
TALBOT: Samba 0.9 (51A601, 51A591) 1981-1985
TALBOT: Samba 1.2 Rallye (51A692) 1983-1986
TALBOT: Samba 1.4 (51A632) 1981-1986
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Ordinary (mechanical) release bearing designed for CITROEN, PEUGEOT, RENAULT, and TALBOT clutch systems.
- OE-match design with multiple OE number interchange including 7910011860 and 2041.31.
- Cross-references with SKF VKC2108, LUK 500001010, and SACHS 1850282628.
- Factory pre-lubricated for reliable clutch disengagement.
- 2-year / 50,000 km warranty for aftermarket assurance.
Installation Notes
- Inspect the guide sleeve and clutch fork for wear before installing the new release bearing.
- Clean the transmission input shaft and guide tube thoroughly before installation.
- Apply a light coat of high-temperature grease to the release bearing contact points per manufacturer specifications.
- Verify smooth sliding movement of the bearing on the guide tube before transmission reassembly.
- Torque the retaining bolts to manufacturer factory specifications.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces release bearings to OE specifications. Contact us
