Wheel Hub 513362
The 513362 wheel hub assembly from DUHUI Bearing provides a direct-fit replacement for the front axle of select BMW M5 and M6 vehicles manufactured between 2012 and 2018. This complete hub assembly features Gen 3 roll-form design with an integrated ABS sensor and is pre-assembled for simplified installation. This kit matches OE specifications including 31202284375 and 31202358250, and interchanges with industry-standard references such as MOOG 513362 and SKF BR930526.
Technical Specifications
| Specification | Value / Detail |
|---|---|
| DH Code | DWH1911 |
| Part Number | 513362 |
| Product Type | Wheel Hub Assembly |
| Installation Location | Front Axle |
| Kit Contents | Hub × 1 |
| Design Type | Gen 3 (Roll-Form Design) |
| Flange Diameter | 145.00 mm (5.709 inch) |
| Bolt Circle Diameter | 120.00 mm (4.724 inch) |
| Wheel Pilot Diameter | 72.40 mm (2.850 inch) |
| Brake Pilot Diameter | 74.90 mm (2.949 inch) |
| Flange Offset | 43.90 mm (1.728 inch) |
| Hub Pilot Diameter | 97.80 mm (3.850 inch) |
| Wheel Stud Quantity | 5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | With integrated sensor |
| Pre-Greased | Yes |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code:
DWH1911
OE Numbers:
31202284375, 31202358250
Reference Numbers (Interchange):
MOOG: 513362
SKF: BR930526
ACDelco: HA590553
Vehicle Fitment
BMW M5 (F10): 2013–2016
BMW M5 (F90): 2018
BMW M6 (F12/F13): 2012–2015
BMW M6 GRAN COUPE (F06): 2014–2015
Fitment note: This hub assembly is designed specifically for S63 engine (twin-turbo V8) models. Fits front axle, both driver and passenger sides. Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Direct OE replacement for BMW F10 M5 and F12/F13 M6 applications. Matches OE specifications 31202284375 and 31202358250.
- Gen 3 roll-form design ensures consistent and optimal factory-installed preload, minimizing noise and wear.
- Integrated ABS sensor with abrasion-resistant cord ensures proper anti-lock braking system function.
- Premium quad-lip seal design inhibits damage by keeping moisture and contaminants out.
- Pre-set, pre-lubricated with high-temperature grease, and sealed – maintenance-free design.
- Coated wheel studs resist corrosion for easier removal and proper torqueing.
- Fully assembled kit – no additional components required for installation.
Installation Notes
- Confirm your vehicle is equipped with the S63 twin-turbo V8 engine before ordering. This hub is specific to M5 and M6 models and is NOT compatible with standard 5-Series or 6-Series applications.
- Verify your vehicle is equipped with ABS before installation.
- Before installation, compare the flange diameter (145.00 mm), bolt circle (120.00 mm), and wheel pilot diameter (72.40 mm) against your original hub.
- This hub features Gen 3 roll-form design with precise factory preload. Do not attempt to adjust or repack the bearing.
- Connect the ABS sensor harness properly and ensure the cable is routed away from rotating components.
- Torque the axle nut and mounting bolts to BMW specification. Mounting bolts are sold separately.
- This hub fits both front driver and passenger sides. Sold individually.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hub assemblies, center support bearings, and related components to OE specifications. Contact us
