Wheel Hub 515093
The DUHUI Bearing 515093 front wheel hub is a direct OE-replacement assembly designed for Hummer H3 models from 2006 through 2009 with various engine configurations. This front wheel hub bearing matches OE references 15111599 and 15821079, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01588 |
| Part Number | 515093 |
| Position | Front Axle |
| Flange Diameter | 178.69 mm (7.035 inch) |
| Bolt Circle Diameter | 139.70 mm (5.500 inch) |
| Hub Pilot Diameter | 99.34 mm (3.911 inch) |
| Brake Pilot Diameter | 100.66 mm (3.963 inch) |
| Flange Offset | 50.19 mm (1.976 inch) |
| Hub Bolt Circle Diameter | 126.01 mm (4.961 inch) |
| Bolt Size (Wheel Studs) | M12 x 1.5 |
| Bolt Size (Hub Mounting) | M14 x 1.5 |
| Spline Quantity | 33 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01588
OE Numbers: 515093, 15111599, 15821079
Reference Numbers (Interchange):
SKF: BR930566
Timken: HA590758
NTN: HUB247
Vehicle Fitment
Hummer: H3 Alpha V8 5.3L (2008-2009)
Hummer: H3 Base L5 3.7L (2007-2008)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Hummer H3 off-road SUV applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 178.69mm flange diameter with 33-spline axle interface provides robust load capacity.
- Two different M12 and M14 bolt sizes match factory hardware specifications.
- Direct OE cross-reference to 15111599 and 15821079.
Installation Notes
- Confirm 178.69mm flange diameter, 139.70mm bolt circle, and 33-spline count match your original hub before installation.
- Note the two different bolt sizes: wheel studs are M12 x 1.5; hub mounting bolts are M14 x 1.5 – verify both match your original hardware.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Hummer H3 factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
