Wheel Hub 515092
The DUHUI Bearing 515092 front right wheel hub is a direct OE-replacement assembly designed for Chevrolet Astro van models from 2003 through 2005 with the 4.3L V6 engine. This front right wheel hub bearing matches OE references FW792 and 15112450, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01587 |
| Part Number | 515092 |
| Position | Front Axle, Right |
| Flange Diameter | 180.01 mm (7.087 inch) |
| Bolt Circle Diameter | 139.70 mm (5.500 inch) |
| Hub Pilot Diameter | 99.31 mm (3.910 inch) |
| Wheel Pilot Diameter | 78.23 mm (3.080 inch) |
| Brake Pilot Diameter | 78.49 mm (3.090 inch) |
| Flange Offset | 50.04 mm (1.970 inch) |
| Hub Bolt Circle Diameter | 124.71 mm (4.910 inch) |
| Bolt Size (Wheel Studs) | M14 x 1.5 |
| Bolt Size (Hub Mounting) | M14 x 1.5 |
| Wheel Stud Quantity | 6 |
| Mounting Bolt Holes | 3 |
| Spline Quantity | 33 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01587
OE Numbers: 515092, FW792, 15112450
Reference Numbers (Interchange):
SKF: FW792
Timken: HA590759
NTN: HUB248
Vehicle Fitment
Chevrolet: Astro Base V6 4.3L (2003-2005)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front right wheel hub bearing engineered for Chevrolet Astro van applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 6-stud configuration with 33-spline axle interface matches factory specifications.
- 180.01mm flange diameter with 3-bolt mounting configuration provides robust load capacity.
- Direct OE cross-reference to FW792 and 15112450.
Installation Notes
- Confirm this is a front right (passenger side) application before installation.
- Verify 180.01mm flange diameter, 139.70mm bolt circle, 33-spline count, and M14 x 1.5 bolt size match your original hub.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Chevrolet Astro factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
