Wheel Hub 515090
The DUHUI Bearing 515090 front wheel hub is a direct OE-replacement assembly designed for Hyundai Entourage and Kia Sedona MPV models spanning 2005 through 2009 with the 3.8L V6 engine. This front wheel hub bearing matches OE references FW790 and VKBA7488, delivering factory-spec performance for minivan applications without ABS sensor ring.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01585 |
| Part Number | 515090 |
| Position | Front Axle |
| Flange Diameter | 161.32 mm (6.351 inch) |
| Bolt Circle Diameter | 139.85 mm (5.506 inch) |
| Hub Pilot Diameter | 89.00 mm (3.504 inch) |
| Wheel Pilot Diameter | 92.20 mm (3.630 inch) |
| Brake Pilot Diameter | 96.29 mm (3.791 inch) |
| Flange Offset | 48.41 mm (1.906 inch) |
| Hub Bolt Circle Diameter | 123.14 mm (4.848 inch) |
| Bolt Size (Wheel Studs) | M12 x 1.5 |
| Bolt Size (Hub Mounting) | M14 x 1.5 |
| Wheel Stud Quantity | 6 |
| Mounting Bolt Holes | 3 |
| Spline Quantity | 31 |
| ABS Sensor | Not Included |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01585
OE Numbers: 515090, FW790, VKBA7488
Reference Numbers (Interchange):
SKF: FW790
Timken: HA590761
NTN: HUB250
Vehicle Fitment
Hyundai: Entourage GL V6 3.8L (2008)
Hyundai: Entourage GLS V6 3.8L (2007-2008)
Kia: Sedona Base V6 3.8L (2007-2009)
Kia: Sedona EX V6 3.8L (2006)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Hyundai Entourage and Kia Sedona minivan applications.
- 6-stud configuration with 31-spline axle interface matches factory driveline specifications.
- 161.32mm flange diameter provides robust load capacity for minivan applications.
- Non-ABS version – does not include ABS sensor ring. Suitable for vehicles without ABS or for ABS-deleted applications.
- Direct OE cross-reference to FW790 and VKBA7488.
Installation Notes
- Confirm 6-stud pattern, 139.85mm bolt circle, 161.32mm flange diameter, and 31-spline count match your original hub before installation. Note: This hub does not include an ABS sensor ring.
- Note the two different bolt sizes: wheel studs are M12 x 1.5; hub mounting bolts are M14 x 1.5 – verify both match your original hardware.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Hyundai or Kia factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
