Wheel Hub 518505
The DUHUI Bearing 518505 front wheel hub is a direct OE-replacement assembly designed for Honda Accord models from 1986 through 1989. This front wheel hub bearing matches OE references FW505K and BR930166K, delivering factory-spec performance for classic passenger car applications without ABS sensor ring.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1627 |
| Part Number | 518505 |
| Position | Front Axle |
| Flange Diameter | 121.41 mm (4.780 inch) |
| Bolt Circle Diameter | 100.00 mm (3.937 inch) |
| Hub Pilot Diameter | 40.04 mm (1.576 inch) |
| Wheel Pilot Diameter | 56.11 mm (2.209 inch) |
| Brake Pilot Diameter | 60.86 mm (2.396 inch) |
| Flange Offset | 18.24 mm (0.718 inch) |
| Bolt Size | 4844 |
| Wheel Stud Quantity | 4 |
| Spline Quantity | 26 |
| ABS Sensor | Not Included |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1627
OE Numbers: 518505, FW505K, BR930166K
Reference Numbers (Interchange):
SKF: FW505K
Timken: HA590767
NTN: HUB256
Vehicle Fitment
Honda: Accord (1986-1989)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Honda Accord classic applications.
- 4-stud configuration with 26-spline axle interface matches factory driveline specifications.
- 121.41mm flange diameter with 100mm bolt circle provides proper load capacity.
- Non-ABS version – does not include ABS sensor ring. Suitable for vehicles without ABS or for ABS-deleted applications.
- Direct OE cross-reference to FW505K and BR930166K.
Installation Notes
- Confirm 4-stud pattern, 100mm bolt circle, 121.41mm flange diameter, and 26-spline count match your original hub before installation. Note: This hub does not include an ABS sensor ring.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Honda Accord factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
