Wheel Hub 518515
The DUHUI Bearing 518515 front wheel hub is a direct OE-replacement assembly designed for Ford Escape and Mazda Tribute models with the 2.0L L4 engine. This front wheel hub bearing matches OE references BR930286, HA590286K, 91258514, and 4L8Z1104AA, delivering factory-spec performance for compact SUV applications with non-integral ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1637 |
| Part Number | 518515 |
| Position | Front Axle |
| Outside Diameter | 139.80 mm (5.504 inch) |
| Inside Diameter | 72.00 mm (2.835 inch) |
| Stud Quantity | 5 |
| Design Type | Gen 1 |
| ABS Sensor | Non-Integral |
| Pre-Greased | Yes |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1637
OE Numbers: 518515, BR930286, HA590286K, 91258514, 4L8Z1104AA
Reference Numbers (Interchange):
SKF: BR930286
Timken: HA590286K
NTN: HUB258
Vehicle Fitment
Ford: Escape 2.0L L4
Mazda: Tribute 2.0L L4
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Ford Escape and Mazda Tribute compact SUV applications.
- Gen 1 design with 139.8mm outside diameter and 5-stud configuration.
- Factory pre-greased and sealed – ready for installation out of the box.
- Non-integral ABS sensor design – retains original sensor or allows separate replacement.
- Direct OE cross-reference to BR930286, HA590286K, 91258514, and 4L8Z1104AA.
Installation Notes
- Confirm 139.8mm outside diameter, 72mm inside diameter, and 5-stud pattern match your original hub before installation.
- This hub uses a non-integral ABS sensor – retain and transfer your existing ABS sensor or purchase separately as needed.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Ford or Mazda factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
