Wheel Hub 518514
The DUHUI Bearing 518514 front wheel hub is a direct OE-replacement assembly designed for Saturn SC Coupe and SL Sedan models with the 1.9L L4 DOHC engine. This front wheel hub bearing matches OE references FW5514K, 21011098, BR930156K, and HA590156K, delivering factory-spec performance for compact passenger car applications without ABS sensor ring.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1636 |
| Part Number | 518514 |
| Position | Front Axle |
| Flange Diameter | 137.16 mm (5.400 inch) |
| Bolt Circle Diameter | 99.06 mm (3.900 inch) |
| Hub Pilot Diameter | 35.56 mm (1.400 inch) |
| Wheel Pilot Diameter | 60.96 mm (2.400 inch) |
| Brake Pilot Diameter | 55.88 mm (2.200 inch) |
| Wheel Stud Quantity | 4 |
| Spline Quantity | 33 |
| ABS Sensor | Not Included |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1636
OE Numbers: 518514, FW5514K, 21011098, BR930156K, HA590156K
Reference Numbers (Interchange):
SKF: FW5514K
Timken: HA590156K
NTN: HUB259
Vehicle Fitment
Saturn: SC Coupe 1.9L L4 DOHC
Saturn: SL Sedan 1.9L L4 DOHC
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Saturn SC and SL compact applications.
- 4-stud configuration with 33-spline axle interface matches factory driveline specifications.
- 137.16mm flange diameter with 99.06mm bolt circle provides proper load capacity.
- Non-ABS version – does not include ABS sensor ring. Suitable for vehicles without ABS or for ABS-deleted applications.
- Direct OE cross-reference to FW5514K, 21011098, BR930156K, and HA590156K.
Installation Notes
- Confirm 4-stud pattern, 99.06mm bolt circle, 137.16mm flange diameter, and 33-spline count match your original hub before installation. Note: This hub does not include an ABS sensor ring.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Saturn factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
