Wheel Hub 518504
The DUHUI Bearing 518504 front wheel hub is a direct OE-replacement assembly designed for Honda Accord and Prelude models from 1982 through 1983. This front wheel hub bearing matches OE references FW504K and BR930154K, delivering factory-spec performance for classic Honda applications without ABS sensor ring.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1626 |
| Part Number | 518504 |
| Position | Front Axle |
| Flange Diameter | 120.65 mm (4.750 inch) |
| Bolt Circle Diameter | 100.00 mm (3.940 inch) |
| Hub Pilot Diameter | 33.63 mm (1.324 inch) |
| Wheel Pilot Diameter | 55.88 mm (2.200 inch) |
| Brake Pilot Diameter | 60.83 mm (2.395 inch) |
| Flange Offset | 20.07 mm (0.790 inch) |
| Bolt Size | 4844 |
| Wheel Stud Quantity | 4 |
| Spline Quantity | 24 |
| ABS Sensor | Not Included |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1626
OE Numbers: 518504, FW504K, BR930154K
Reference Numbers (Interchange):
SKF: FW504K
Timken: HA590768
NTN: HUB260
Vehicle Fitment
Honda: Accord (1982)
Honda: Accord (1983 to Serial #DC101603, DC099354)
Honda: Prelude (1983 and later)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Honda Accord and Prelude classic applications.
- 4-stud configuration with 24-spline axle interface matches factory driveline specifications.
- 120.65mm flange diameter with 100mm bolt circle provides proper load capacity.
- Non-ABS version – does not include ABS sensor ring. Suitable for vehicles without ABS or for ABS-deleted applications.
- Direct OE cross-reference to FW504K and BR930154K.
Installation Notes
- Confirm 4-stud pattern, 100mm bolt circle, 120.65mm flange diameter, and 24-spline count match your original hub before installation. Note: This hub does not include an ABS sensor ring.
- Verify vehicle serial number range for Accord – this hub applies to 1983 models up to specific serial numbers as indicated.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Honda Accord/Prelude factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
