Wheel Hub 518512
The DUHUI Bearing 518512 front wheel hub is a direct OE-replacement assembly designed for Chrysler, Dodge, and Plymouth Neon models from 1995 through 1999. This front wheel hub bearing matches OE references FW5512K, 4670287, BR930182K, and HA590182K, delivering factory-spec performance for compact passenger car applications without ABS sensor ring.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1634 |
| Part Number | 518512 |
| Position | Front Axle |
| Flange Diameter | 124.46 mm (4.900 inch) |
| Bolt Circle Diameter | 99.06 mm (3.900 inch) |
| Hub Pilot Diameter | 76.20 mm (3.000 inch) |
| Wheel Pilot Diameter | 55.88 mm (2.200 inch) |
| Brake Pilot Diameter | 60.96 mm (2.400 inch) |
| Wheel Stud Quantity | 5 |
| Spline Quantity | 23 |
| ABS Sensor | Not Included |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1634
OE Numbers: 518512, FW5512K, 4670287, BR930182K, HA590182K
Reference Numbers (Interchange):
SKF: FW5512K
Timken: HA590182K
NTN: HUB262
Vehicle Fitment
Chrysler: Neon (1995-1999)
Dodge: Neon (1995-1999)
Plymouth: Neon (1995-1999)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Chrysler, Dodge, and Plymouth Neon compact applications.
- 5-stud configuration with 23-spline axle interface matches factory driveline specifications.
- 124.46mm flange diameter with 99.06mm bolt circle provides proper load capacity.
- Non-ABS version – does not include ABS sensor ring. Suitable for vehicles without ABS or for ABS-deleted applications.
- Direct OE cross-reference to FW5512K, 4670287, BR930182K, and HA590182K.
Installation Notes
- Confirm 5-stud pattern, 99.06mm bolt circle, 124.46mm flange diameter, and 23-spline count match your original hub before installation. Note: This hub does not include an ABS sensor ring.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly to prevent improper seating.
- Torque the hub retaining nut and wheel lug nuts to Chrysler/Dodge/Plymouth Neon factory specifications.
- Rotate the hub after installation to confirm smooth operation before road testing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
