Wheel Hub 515058
The DUHUI Bearing 515058 front wheel hub is a direct OE-replacement assembly designed for Hummer H2 and select Chevrolet 2500 series 4WD pickup truck models from 2001 through 2007. This front wheel hub bearing matches OE reference 515058 and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01553 |
| Part Number | 515058 |
| Position | Front Axle |
| Flange Diameter | 200.66 mm (7.900 inch) |
| Bolt Circle Diameter | 165.10 mm (6.500 inch) |
| Hub Pilot Diameter | 106.68 mm (4.200 inch) |
| Wheel Pilot Diameter | 116.84 mm (4.600 inch) |
| Brake Pilot Diameter | 116.84 mm (4.600 inch) |
| Hub Bolt Circle Diameter | 139.70 mm (5.500 inch) |
| Flange Offset | 68.58 mm (2.700 inch) |
| Wheel Stud Quantity | 8 |
| Mounting Bolt Holes | 4 |
| Spline Quantity | 33 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01553
OE Numbers: 515058
Reference Numbers (Interchange):
SKF: BR930560
Timken: HA590776
NTN: HUB272
Vehicle Fitment
Hummer: H2 (2003-2007)
Chevrolet: Avalanche 2500 4WD (2002-2007)
Chevrolet: Silverado 1500 4WD, 8-Stud Hub Assembly (2001-2006)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Hummer H2 and Chevrolet 2500 series heavy-duty 4WD applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 8-stud configuration with 33-spline axle interface matches heavy-duty factory specifications.
- 200.66mm flange diameter with 165.10mm bolt circle provides maximum load capacity.
- Direct OE cross-reference to 515058 ensures accurate replacement.
Installation Notes
- Confirm 8-stud pattern, 165.10mm bolt circle, 200.66mm flange diameter, 33-spline count, and 8-stud hub assembly configuration match your original hub before installation.
- Verify vehicle model year and drivetrain – this hub applies to 4WD and 8-stud hub assembly configurations.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Hummer/Chevrolet factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
