Wheel Hub 515110
The DUHUI Bearing 515110 front left wheel hub is a direct OE-replacement assembly designed for Chevrolet Colorado and Isuzu I-Series pickup truck models from 2004 through 2008 with various engine configurations. This front left wheel hub bearing matches OE references 15100275, 715110, 29515110, and HA590060, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1605 |
| Part Number | 515110 |
| Position | Front Axle, Left |
| Flange Diameter | 184.15 mm (7.250 inch) |
| Bolt Circle Diameter | 139.70 mm (5.500 inch) |
| Hub Pilot Diameter | 85.09 mm (3.350 inch) |
| Wheel Pilot Diameter | 99.57 mm (3.920 inch) |
| Brake Pilot Diameter | 100.08 mm (3.940 inch) |
| Flange Offset | 67.31 mm (2.650 inch) |
| Hub Bolt Circle Diameter | 112.78 mm (4.440 inch) |
| Bolt Size (Wheel Studs) | M12 x 1.5 |
| Bolt Size (Hub Mounting) | M12 x 1.75 |
| Wheel Stud Quantity | 6 |
| Mounting Bolt Holes | 4 |
| Spline Quantity | 27 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1605
OE Numbers: 515110, 15100275, 715110, 29515110, HA590060
Reference Numbers (Interchange):
SKF: 715110
Timken: HA590060
NTN: HUB280
Vehicle Fitment
Chevrolet: Colorado LS L4 2.9L (2007-2008)
Chevrolet: Colorado LS L5 3.7L (2007-2008)
Isuzu: I-370 LS L5 3.7L (2007-2008)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front left wheel hub bearing engineered for Chevrolet Colorado and Isuzu I-Series mid-size truck applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 6-stud configuration with 27-spline axle interface matches factory specifications.
- 184.15mm flange diameter with 139.70mm bolt circle provides robust load capacity.
- Direct OE cross-reference to 15100275, 715110, 29515110, and HA590060.
Installation Notes
- Confirm this is a front left (driver side) application before installation.
- Verify 6-stud pattern, 139.70mm bolt circle, 184.15mm flange diameter, 27-spline count, and ABS sensor compatibility match your original hub.
- Note the two different bolt sizes: wheel studs are M12 x 1.5; hub mounting bolts are M12 x 1.75 – verify both match your original hardware.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Chevrolet or Isuzu factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
