Wheel Hub 515107
The DUHUI Bearing 515107 front right wheel hub is a direct OE-replacement assembly designed for Isuzu I-Series and Chevrolet Colorado pickup truck models from 2004 through 2008 with various engine configurations. This front right wheel hub bearing matches OE references FW7107, 15178883, 7300399, and BR930702, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1602 |
| Part Number | 515107 |
| Position | Front Axle, Right |
| Flange Diameter | 184.15 mm (7.250 inch) |
| Bolt Circle Diameter | 139.70 mm (5.500 inch) |
| Hub Pilot Diameter | 85.09 mm (3.350 inch) |
| Wheel Pilot Diameter | 99.57 mm (3.920 inch) |
| Brake Pilot Diameter | 100.08 mm (3.940 inch) |
| Flange Offset | 67.06 mm (2.640 inch) |
| Hub Bolt Circle Diameter | 112.27 mm (4.420 inch) |
| Bolt Size (Wheel Studs) | M12 x 1.5 |
| Bolt Size (Hub Mounting) | M12 x 1.75 |
| Wheel Stud Quantity | 6 |
| Mounting Bolt Holes | 4 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1602
OE Numbers: 515107, FW7107, 15178883, 7300399, BR930702
Reference Numbers (Interchange):
SKF: FW7107
Timken: HA590785
NTN: HUB285
Vehicle Fitment
Isuzu: I-290 LS/S L4 2.9L (2007-2008)
Chevrolet: Colorado LS L4 2.9L (2007-2008)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front right wheel hub bearing engineered for Isuzu I-Series and Chevrolet Colorado mid-size truck applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 6-stud configuration matches factory specifications.
- 184.15mm flange diameter with 139.70mm bolt circle provides robust load capacity.
- Direct OE cross-reference to FW7107, 15178883, 7300399, and BR930702.
Installation Notes
- Confirm this is a front right (passenger side) application before installation.
- Verify 6-stud pattern, 139.70mm bolt circle, 184.15mm flange diameter, and ABS sensor compatibility match your original hub.
- Note the two different bolt sizes: wheel studs are M12 x 1.5; hub mounting bolts are M12 x 1.75 – verify both match your original hardware.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Isuzu or Chevrolet factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
