Wheel Hub 515096
The DUHUI Bearing 515096 front wheel hub is a direct OE-replacement assembly designed for Cadillac Escalade and Chevrolet Avalanche, Silverado 1500, and Suburban models spanning 2005 through 2014 with V8 engine configurations. This front wheel hub bearing matches OE references SP500301 and 25918329, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1591 |
| Part Number | 515096 |
| Position | Front Axle |
| Flange Diameter | 178.64 mm (7.033 inch) |
| Bolt Circle Diameter | 139.70 mm (5.500 inch) |
| Hub Pilot Diameter | 99.34 mm (3.911 inch) |
| Brake Pilot Diameter | 78.41 mm (3.087 inch) |
| Hub Bolt Circle Diameter | 126.01 mm (4.961 inch) |
| Flange Offset | 50.19 mm (1.976 inch) |
| Bolt Size (Wheel Studs) | M14 x 1.5 |
| Bolt Size (Hub Mounting) | M14 x 1.5 |
| Spline Quantity | 33 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1591
OE Numbers: 515096, SP500301, 25918329
Reference Numbers (Interchange):
SKF: SP500301
Timken: HA590787
NTN: HUB287
Vehicle Fitment
Cadillac: Escalade (2006-2014)
Chevrolet: Avalanche (2005-2013)
Chevrolet: Avalanche LS V8 5.3L Flex (2007-2009)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Cadillac Escalade and Chevrolet full-size SUV/truck applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 33-spline axle interface with M14 x 1.5 bolt size matches heavy-duty factory specifications.
- 178.64mm flange diameter with 139.70mm bolt circle provides robust load capacity.
- Direct OE cross-reference to SP500301 and 25918329.
Installation Notes
- Confirm 178.64mm flange diameter, 139.70mm bolt circle, 33-spline count, and M14 x 1.5 bolt size match your original hub before installation.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Cadillac/Chevrolet factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
