Wheel Hub 515056
The DUHUI Bearing 515056 front wheel hub is a direct OE-replacement assembly designed for Ford Excursion and F-250/F-350 Super Duty 4WD pickup truck models from 2002 through 2004 with single rear wheels and 4-Wheel ABS. This front wheel hub bearing matches OE reference 515056 and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH01551 |
| Part Number | 515056 |
| Position | Front Axle |
| Flange Diameter | 203.20 mm (8.000 inch) |
| Bolt Circle Diameter | 170.18 mm (6.700 inch) |
| Hub Pilot Diameter | 111.76 mm (4.400 inch) |
| Wheel Pilot Diameter | 124.46 mm (4.900 inch) |
| Brake Pilot Diameter | 129.54 mm (5.100 inch) |
| Hub Bolt Circle Diameter | 139.70 mm (5.500 inch) |
| Flange Offset | 45.72 mm (1.800 inch) |
| Wheel Stud Quantity | 8 |
| Mounting Bolt Holes | 4 |
| Spline Quantity | 55 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH01551
OE Numbers: 515056
Reference Numbers (Interchange):
SKF: BR930558
Timken: HA590788
NTN: HUB289
Vehicle Fitment
Ford: Excursion 4WD, Fine Thread Studs (2002-2005)
Ford: F-250 Super Duty 4WD, 4-Wheel ABS, Single Rear Wheels (2003-2004)
Ford: F-350 Super Duty 4WD, 4-Wheel ABS, Single Rear Wheels (2003-2004)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Ford Excursion and F-250/F-350 Super Duty heavy-duty 4WD applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 8-stud configuration with 55-spline axle interface matches heavy-duty factory specifications.
- 203.20mm flange diameter with 170.18mm bolt circle provides maximum load capacity.
- Fine thread studs as per factory specification – verify stud threading matches your original hardware.
Installation Notes
- Confirm 8-stud pattern, 170.18mm bolt circle, 203.20mm flange diameter, and 55-spline count match your original hub before installation.
- This hub is for single rear wheel (SRW) applications with 4-Wheel ABS – verify your vehicle configuration.
- Note: Fine thread studs – confirm stud threading matches your original hardware.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Ford Excursion/Super Duty factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
