Wheel Hub 515080
The DUHUI Bearing 515080 front wheel hub is a direct OE-replacement assembly designed for Ford F-150 pickup truck models from 2005 through 2007. This front wheel hub bearing matches OE references SP550208, FW780, BR930459, and 7L3Z1104B, and features an integrated ABS sensor for full system compatibility.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1575 |
| Part Number | 515080 |
| Position | Front Axle |
| Flange Diameter | 189.99 mm (7.480 inch) |
| Flange Shape | Triangular |
| Bolt Circle Diameter | 149.86 mm (5.900 inch) |
| Hub Pilot Diameter | 99.31 mm (3.910 inch) |
| Wheel Pilot Diameter | 86.87 mm (3.420 inch) |
| Brake Pilot Diameter | 89.92 mm (3.540 inch) |
| Hub Bolt Circle Diameter | 160.02 mm (6.300 inch) |
| Flange Offset | 45.97 mm (1.810 inch) |
| Bolt Size (Wheel Studs) | M14 x 2.0 |
| Bolt Size (Hub Mounting) | M14 x 1.5 |
| Wheel Stud Quantity | 7 |
| Mounting Bolt Holes | 4 |
| Spline Quantity | 45 |
| ABS Sensor | Integrated |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1575
OE Numbers: 515080, SP550208, FW780, BR930459, 7L3Z1104B
Reference Numbers (Interchange):
SKF: SP550208
Timken: HA590805
NTN: HUB308
Vehicle Fitment
Ford: F-150 Pickup (2005-2007)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Front axle wheel hub bearing engineered for Ford F-150 pickup applications.
- Integrated ABS sensor eliminates separate sensor purchase and installation.
- 7-stud configuration with 45-spline axle interface matches factory specifications.
- Triangular flange design with 189.99mm flange diameter and 149.86mm bolt circle provides robust load capacity.
- Direct OE cross-reference to SP550208, FW780, BR930459, and 7L3Z1104B.
Installation Notes
- Confirm 7-stud pattern, 149.86mm bolt circle, 189.99mm flange diameter, 45-spline count, and M14 x 2.0 stud size match your original hub before installation.
- Note the two different bolt sizes: wheel studs are M14 x 2.0; hub mounting bolts are M14 x 1.5 – verify both match your original hardware.
- Inspect the steering knuckle bore for wear or damage prior to fitting the new hub.
- Clean all mounting surfaces thoroughly and verify ABS sensor connector compatibility.
- Torque the hub retaining nut and wheel lug nuts to Ford F-150 factory specifications.
- After installation, verify ABS sensor function with a diagnostic tool.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
