Wheel Hub 512395
The DUHUI Bearing 512395 wheel hub is a direct OE-replacement assembly designed for Volvo XC90 models from 2003 through 2014. This rear wheel hub bearing matches OE reference 512395 and is engineered for rear axle applications on the XC90 platform. It serves as a reliable OEM replacement wheel hub for both daily driving and heavy-load use.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1273 |
| Part Number | 512395 |
| Position | Rear Axle |
| Bearing Generation | Gen 3 |
| Inside Diameter | 68.00 mm (2.677 inch) |
| Outside Diameter | 135.80 mm (5.346 inch) |
| Flange Diameter | 135.70 mm (5.343 inch) |
| Flange Offset | 58.90 mm (2.319 inch) |
| Wheel Pilot Diameter | 66.90 mm (2.634 inch) |
| Hub Pilot Diameter | 87.40 mm (3.441 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Number of Bolts | 5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Non-Integrated |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1273
OE Numbers: 512395, 30639877, 30748192, 31201010, 31340689, 31340690, 31658084, 8624647
Reference Numbers (Interchange):
SKF: BR930517
Timken: HA590445
NTN: WE61438
MOOG: 512395
Mevotech: H512395
GMB: 790-0025
GSP: 733395
Vehicle Fitment
Volvo: XC90 (2003-2014)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and mounting points into one unit for simplified rear axle installation.
- 4-bolt flange pattern matches the original mounting configuration on Volvo XC90 models from 2003 to 2014.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Steel hub construction provides durability under load and resistance to wear.
- Engineered to OE specifications for proper fit and function on the XC90 platform.
- Non-integrated ABS design works with the existing wheel speed sensor on the vehicle.
Installation Notes
- This hub is for rear axle applications only – verify position before ordering.
- Confirm the 4-bolt flange pattern matches your XC90 mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the hub retaining bolts to Volvo factory specifications for the XC90.
- Inspect the existing ABS sensor and wiring harness before installation, as this hub does not include an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
