Wheel Hub 512394
The DUHUI Bearing 512394 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Lancer, Outlander, and ASX models. This rear wheel hub bearing matches OE references including 512394, VKBA7417, and HA590256, and is engineered for rear axle applications on these platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1272 |
| Part Number | 512394 |
| Position | Rear Axle |
| Bearing Generation | Gen 3 |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Number of Bolts | 5 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1272
OE Numbers: 512394, VKBA7417, HA590256, 3785A008, 3785A010, 713619870
Reference Numbers (Interchange):
SKF: BR930822
Timken: HA590256
NTN: WE60472
SNR: R173.59
MOOG: 512394
Mevotech: H512394
GMB: 720-0358
Vehicle Fitment
Mitsubishi: ASX (GA_W_) (2010-), Lancer VIII (CY_A, CZ_A) (2007-), Lancer VIII Sportback (CX_A) (2007-), Outlander (CW_W) (2006-2012), Lancer DE 2.0L 4B11 (2008-2012), Lancer ES 2.0L 4B11 (2008-2012), Lancer ES Sportback 2.0L 4B11 (2011), Lancer Evolution GSR 2.0L 4B11 Turbo (2008-2012), Lancer Evolution MR 2.0L 4B11 Turbo (2008-2012), Lancer Evolution MR Touring 2.0L 4B11 Turbo (2010-2011)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 4-bolt flange pattern with 140.00 mm flange diameter matches the original mounting configuration on Mitsubishi Lancer and Outlander platforms.
- 5 wheel studs ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Engineered to OE specifications for proper fit and function on the Lancer VIII, Outlander CW_W, and ASX platforms.
Installation Notes
- This hub is for rear axle applications only – verify position before ordering.
- Confirm the 4-bolt flange pattern and 140.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the hub retaining bolts to Mitsubishi factory specifications for the Lancer and Outlander.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
