Wheel Hub 512393
The DUHUI Bearing 512393 wheel hub is a direct OE-replacement assembly designed for Suzuki SX4 models from 2007 through 2013. This rear wheel hub bearing matches OE references including 512393, VKBA7460, and HA590331, and is engineered for rear axle applications on the SX4 platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1271 |
| Part Number | 512393 |
| Position | Rear Axle |
| Bearing Generation | Gen 3 |
| Flange Diameter | 140.00 mm (5.512 inch) |
| Flange Offset | 60.00 mm (2.362 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 62.00 mm (2.441 inch) |
| Hub Pilot Diameter | 71.10 mm (2.799 inch) |
| Number of Bolts | 5 |
| Flange Bolt Hole Quantity | 4 |
| Spline Quantity | 24 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1271
OE Numbers: 512393, VKBA7460, HA590331, 4340280J50, 4340280J51, 4340280J52, 4340280J53, 4340280J54
Reference Numbers (Interchange):
SKF: BR930781
Timken: HA590331
NTN: WE60500
MOOG: 512393
Mevotech: H512393
BCA: WE60499
Vehicle Fitment
Suzuki: SX4 (2007-2013), SX4 Crossover (2010-2013)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 4-bolt flange pattern with 140.00 mm flange diameter matches the original mounting configuration on Suzuki SX4 models.
- 24-spline count ensures proper engagement with the axle shaft.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Engineered to OE specifications for proper fit and function on the SX4 platform.
Installation Notes
- This hub is for rear axle applications only – verify position before ordering.
- Confirm the 4-bolt flange pattern and 140.00 mm flange diameter match your SX4 mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the hub retaining bolts to Suzuki factory specifications for the SX4.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
