Wheel Hub 4340258M00
The DUHUI Bearing 4340258M00 wheel hub is a direct OE-replacement assembly designed for Suzuki Swift IV (FZ, NZ) models from 2012 onward. This rear wheel hub bearing matches OE references including 4340258M00, 713192410, 9400199, and ADK88336, and is engineered for rear axle applications. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH0526 |
| Part Number | 4340258M00 |
| Position | Rear Axle |
| Bearing Type | Gen 3 Hub Assembly |
| Outer Diameter | 120.00 mm (4.724 inch) |
| Inner Diameter | 62.00 mm (2.441 inch) |
| Width | 60.00 mm (2.362 inch) |
| Number of Bolts | 5 |
| ABS Sensor | Integrated |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH0526
OE Numbers: 4340258M00, 713192410, 9400199, F678526RDLG3WAM, ADK88336, 43402-58M00, 43402-71L00
Reference Numbers (Interchange):
SKF: VKBA7645
FAG: 713192410
Blue Print: ADK88336
SNR: R177.03
PFI: PHU9400199
Optimal: 972717
GMB: 765-0010
Vehicle Fitment
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 120.00 mm outer diameter and 62.00 mm inner diameter ensure proper fit on the Suzuki Swift IV rear spindle.
- 5 wheel studs ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Engineered to OE specifications for proper fit and function on the Swift IV (FZ, NZ) platform.
Installation Notes
- This hub is for rear axle applications on Suzuki Swift IV (FZ, NZ) models – verify position before ordering.
- Confirm the 5-stud flange pattern and 120.00 mm outer diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the hub retaining bolts to Suzuki factory specifications for the Swift IV.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
