Wheel Hub 512384
The DUHUI Bearing 512384 wheel hub is a direct OE-replacement assembly designed for Nissan Sentra models from 2007 through 2012. This rear wheel hub bearing matches OE references including 512384, BR930691, and 43202ET010, and is engineered for rear axle applications on the B16 platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor for vehicles equipped with four-wheel ABS.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1265 |
| Part Number | 512384 |
| Position | Rear Axle |
| Bearing Type | Ball Bearing |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Flange Offset | 69.00 mm (2.717 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 67.90 mm (2.673 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Wheel Pilot Diameter | 65.90 mm (2.594 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1265
OE Numbers: 512384, BR930691, 43202ET010, MB30306, 530391, 43202ET000, 43202EL000, 432021J61A
Reference Numbers (Interchange):
SKF: BR930691
Timken: HA590287
NTN: WE60515
MOOG: 512384
Mevotech: H512384
BCA: WE60515
GMB: 750-0305
Vehicle Fitment
Nissan: Sentra Base Model L4 2.0L MR20DE (2007-2011), Sentra Base Model L4 2.0L MR20DE (2011-2012), Sentra S L4 2.0L MR20DE (2007-2010), Sentra S L4 2.0L MR20DE (2011-2012), Sentra SL L4 2.0L MR20DE (2007-2011), Sentra SL L4 2.0L MR20DE (2011-2012), Sentra SR L4 2.0L MR20DE (2009-2011), Sentra SR L4 2.0L MR20DE (2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Ball bearing design provides stable load distribution for rear axle applications on Nissan Sentra B16 models.
- Integrated ABS sensor with magnetic encoder ring provides wheel speed signal directly from the hub assembly for vehicles equipped with four-wheel ABS.
- 148.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Sentra models from 2007 to 2012.
- 4 wheel studs with M12 x 1.25 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Nissan Sentra models equipped with four-wheel ABS – verify your brake configuration before ordering.
- Confirm the 4-stud flange pattern and 148.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to 92 lb-ft (125 Nm) for the rear bearing and hub assembly.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
