Wheel Hub 44600S84A00
The DUHUI Bearing 44600S84A00 wheel hub is a direct OE-replacement assembly designed for Honda Accord models from 1998 through 2002. This front wheel hub bearing matches OE references including 44600-S84-A00, 44600-S84-000, and 44300-S84-A02, and is engineered for front axle applications on the sixth generation Accord platform. It serves as a reliable OEM replacement wheel hub for both driver and passenger sides.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH2246 |
| Part Number | 44600S84A00 |
| Position | Front Axle (Left, Right) |
| Bearing Type | Ball Bearing |
| Flange Diameter | 139.00 mm (5.472 inch) |
| Flange Offset | 47.00 mm (1.850 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Hub Pilot Diameter | 83.00 mm (3.268 inch) |
| Wheel Pilot Diameter | 64.00 mm (2.520 inch) |
| Wheel Stud Quantity | 4 |
| Wheel Stud Size | M12 x 1.5 |
| Spline Quantity | 28 |
| ABS Sensor | Non-Integrated |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH2246
OE Numbers: 44600-S84-A00, 44600-S84-000, 44300-S84-A02, 44600S84A00, 44600S84000
Reference Numbers (Interchange):
BTA: H54018BTA
Bendix: 052380B
SKF: VKBA3250
Dorman: 950-003
TRQ: BHA53171
Optimal: 29SKV465
Vehicle Fitment
Honda: Accord (1998-2002), Accord Coupe (CG) (1997-2003), Accord Sedan (CK, CG, CH, CF) (1997-2003)
Acura: CL (1997-1999)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Ball bearing design provides stable load distribution for front axle applications on Honda Accord sixth generation models.
- 28-spline count ensures proper engagement with the axle shaft on these FWD platforms.
- 139.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Accord models from 1998 to 2002.
- 4 wheel studs with M12 x 1.5 thread ensure proper wheel mounting and torque distribution.
- Serves as a direct replacement for discontinued OEM part 44600-S84-A00.
- Cross-references to BTA, Bendix, SKF, and Dorman part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for front axle applications on Honda Accord and Acura CL models – verify position before ordering.
- Confirm the 28-spline count on the axle shaft matches this hub before installation.
- Clean the knuckle mounting surface thoroughly before installation.
- Torque the axle nut to Honda factory specifications for the Accord – do not use an impact wrench.
- Inspect the wheel bearing and seals for wear before reassembly, as this is a hub that works with a separate bearing.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
