Wheel Hub 512383
The DUHUI Bearing 512383 wheel hub is a direct OE-replacement assembly designed for Nissan Sentra SE-R and SE-R Spec V models from 2007 through 2012. This rear wheel hub bearing matches OE references including 512383, BR930699, and 43202EN000, and is engineered for rear axle applications on the B16 platform. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1264 |
| Part Number | 512383 |
| Position | Rear Axle |
| Bearing Type | Ball Bearing |
| Flange Diameter | 149.00 mm (5.866 inch) |
| Flange Offset | 69.00 mm (2.717 inch) |
| Bolt Circle Diameter | 114.20 mm (4.496 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Wheel Pilot Diameter | 65.89 mm (2.594 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| ABS Sensor | Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1264
OE Numbers: 512383, BR930699, 43202EN000, WA512383, 1411326396, 43202EN00A, 43202EN00B
Reference Numbers (Interchange):
SKF: BR930699
Timken: HA590289
NTN: WE60514
MOOG: 512383
Mevotech: H512383
BCA: WE60514
GMB: 750-0306
Vehicle Fitment
Nissan: Sentra SE-R L4 2.5L QR25DE (2007-2012), Sentra SE-R Spec V L4 2.5L QR25DE (2007-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Ball bearing design provides stable load distribution for rear axle applications on Nissan Sentra SE-R models.
- Integrated ABS sensor with magnetic encoder ring provides wheel speed signal directly from the hub assembly.
- 149.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Sentra SE-R and SE-R Spec V models.
- 5 wheel studs with M12 x 1.25 thread ensure proper wheel mounting and torque distribution for the sport-tuned SE-R platform.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Nissan Sentra SE-R and SE-R Spec V models – verify your trim level before ordering.
- Confirm the 5-stud flange pattern and 149.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the axle nut to 92 lb-ft (125 Nm) for the rear bearing and hub assembly.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
