Wheel Hub 512382
The DUHUI Bearing 512382 wheel hub is a direct OE-replacement assembly designed for Mitsubishi Lancer, Outlander, Peugeot 4007, and Citroen C-Crosser models. This rear wheel hub bearing matches OE references including 512382, VKBA7409, HA590275, and 3785A015, and is engineered for rear axle applications on these platforms. It serves as a reliable OEM replacement wheel hub with integrated ABS sensor.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1263 |
| Part Number | 512382 |
| Position | Rear Axle |
| Design Type | Gen 3 Hub Assembly |
| Bearing Type | Ball Bearing |
| Flange Diameter | 140.50 mm (5.532 inch) |
| Flange Offset | 59.20 mm (2.331 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 80.00 mm (3.150 inch) |
| Hub Pilot Diameter | 88.00 mm (3.465 inch) |
| Wheel Pilot Diameter | 67.00 mm (2.638 inch) |
| Wheel Stud Quantity | 5 |
| Flange Bolt Hole Quantity | 4 |
| Spline Quantity | 27 |
| ABS Sensor | Integrated |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1263
OE Numbers: 512382, VKBA7409, HA590275, 3785A015, 3785A019, 373036, 713619800
Reference Numbers (Interchange):
SKF: BR930866
Timken: HA590275
NTN: HUB157T-10
SNR: R173.28
FAG: 713619800
MOOG: 512382
Mevotech: H512382
BCA: 512382
Vehicle Fitment
Mitsubishi: Outlander (CW_W) (2006-2012), Lancer DE 2.0L 4B11 (2008-2012), Lancer ES 2.0L 4B11 (2008-2012), Lancer Evolution GSR 2.0L 4B11 Turbo (2008-2012), Lancer Evolution MR 2.0L 4B11 Turbo (2008-2012)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly combines the bearing, flange, and ABS sensor into one unit for simplified rear axle installation.
- Integrated ABS sensor provides wheel speed signal directly from the hub assembly.
- 27-spline count ensures proper engagement with the axle shaft on AWD models.
- 140.50 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on Mitsubishi, Peugeot, and Citroen models.
- 5 wheel studs ensure proper wheel mounting and torque distribution.
- Cross-references to SKF, Timken, NTN, SNR, and FAG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Mitsubishi Lancer, Outlander, Peugeot 4007, and Citroen C-Crosser models – verify position before ordering.
- Confirm the 27-spline count on the axle shaft matches this hub before installation.
- Clean the knuckle mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the ABS sensor connector and wiring harness before plugging in the new unit.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
