Wheel Hub 512379
The DUHUI Bearing 512379 wheel hub is a direct OE-replacement assembly designed for Nissan 370Z and a wide range of Infiniti models. This rear wheel hub bearing matches OE references including 512379, HA590225, VKBA7703, and 052023B, and is engineered for rear axle applications on these RWD and AWD platforms. It serves as a reliable OEM replacement wheel hub for the Nissan FM platform and its variants.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1262 |
| Part Number | 512379 |
| Position | Rear Axle |
| Design Type | Gen 3 |
| Inside Diameter | 67.95 mm (2.675 inch) |
| Outside Diameter | 148.00 mm (5.827 inch) |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Flange Offset | 69.00 mm (2.717 inch) |
| Bolt Circle Diameter | 114.30 mm (4.500 inch) |
| Brake Pilot Diameter | 68.00 mm (2.677 inch) |
| Hub Pilot Diameter | 84.00 mm (3.307 inch) |
| Wheel Pilot Diameter | 66.00 mm (2.598 inch) |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| Flange Bolt Hole Quantity | 4 |
| Spline Quantity | 32 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1262
OE Numbers: 512379, HA590225, VKBA7703, 052023B, HA590255, 43202JK00A, 43202JK00B, 432024GA0B, 432024GA0A
Reference Numbers (Interchange):
SKF: BR930730
Timken: HA590255
NTN: WE60531
MOOG: 512379
Mevotech: H512379
GMB: 750-0028
DuraGo: 295-12379
Vehicle Fitment
Nissan: 370Z Coupe (Z34) (2009-2020), 370Z Roadster (Z34) (2009-2020), 370Z NISMO (2009-2020), 370Z Touring (2009-2020), GT-R (2009-2020)
Infiniti: EX35 (2008-2012), EX37 (2013), FX35 (2009-2012), FX37 (2013), FX50 (2009-2013), G25 (2011-2012), G35 (2007-2008), G37 (2008-2013), M35 (2008-2010), M35h (2012-2013), M37 (2011-2013), M45 (2007-2010), M56 (2011-2013), Q40 (2015), Q50 (2014-2022), Q60 (2014-2015), Q60 (2017-2022), Q70 (2014-2019), Q70L (2015-2019), QX50 (2014-2017), QX70 (2014-2017)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly with 32-spline driven hub design for rear axle applications on Nissan and Infiniti FM platform models.
- Non-integrated ABS design for vehicles where the wheel speed sensor is mounted separately from the hub assembly.
- 148.00 mm flange diameter with 4-bolt flange pattern matches the original mounting configuration on 370Z, G37, Q50, and other listed models.
- 5 wheel studs with M12 x 1.25 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, MOOG, and GMB part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Nissan 370Z, GT-R, and Infiniti models – verify position before ordering.
- Confirm the 32-spline count on the axle shaft matches this hub before installation.
- Clean the knuckle mounting surface thoroughly before installation.
- Torque the axle nut to manufacturer specifications for the specific vehicle platform – do not use an impact wrench.
- Inspect the wheel speed sensor and wiring harness before installation, as this hub does not include an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
