Wheel Hub 512375
The DUHUI Bearing 512375 wheel hub is a direct OE-replacement assembly designed for Infiniti M35 and M45 models from 2006 through 2010. This rear wheel hub bearing matches OE references including 512375, HA590175, BR930735, and 43202EG00A, and is engineered for rear axle applications on these RWD and AWD platforms. It serves as a reliable OEM replacement wheel hub for the Infiniti M platform.
Specifications
| Parameter | Value |
|---|---|
| DH Code | DWH1261 |
| Part Number | 512375 |
| Position | Rear Axle |
| Design Type | Gen 3 (Roll-Form Design) |
| Bearing Style | Ball |
| Inside Diameter | 67.95 mm (2.675 inch) |
| Outside Diameter | 148.00 mm (5.827 inch) |
| Flange Diameter | 148.00 mm (5.827 inch) |
| Flange Bolt Hole Quantity | 4 |
| Number of Bolt Holes | 5 |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12 x 1.25 |
| ABS Sensor | Non-Integrated |
| Pre-Greased | Yes |
| Warranty | 2 years / 50,000km |
Important: All information on this page is for reference only. Please verify OE numbers, dimensions, and vehicle fitment against your original part before ordering. Contact us for fitment confirmation.
DH Code & OE Numbers & Reference Numbers
DH Code: DWH1261
OE Numbers: 512375, HA590175, 43202EG00A, BR930735, 40042005, 43202EG000
Reference Numbers (Interchange):
SKF: BR930735
Timken: HA590175
NTN: NT512375
MOOG: 512375
Mevotech: H512375
BCA: WE60525
GMB: 750-0304
Vehicle Fitment
Infiniti: M35 (2006-2010), M45 (2006-2010), M35h (2012-2013), M37 (2011-2013), M56 (2011-2013), Q70 (2014-2019)
Please verify OE number, dimensions and vehicle configuration before ordering.
Product Features
- Generation 3 hub assembly with roll-form design provides stable load distribution for rear axle applications on Infiniti M35 and M45 models.
- Non-integrated ABS design for vehicles where the wheel speed sensor is mounted separately from the hub assembly.
- 148.00 mm flange diameter with 4-bolt modified flange pattern matches the original mounting configuration.
- 5 wheel studs with M12 x 1.25 thread ensure proper wheel mounting and torque distribution.
- Pre-greased and sealed bearing unit requires no additional maintenance after installation.
- Cross-references to SKF, Timken, NTN, and MOOG part numbers ensure accurate replacement sourcing.
Installation Notes
- This hub is for rear axle applications on Infiniti M35 and M45 models – verify position before ordering.
- Confirm the 5-stud flange pattern and 148.00 mm flange diameter match your vehicle mounting knuckle.
- Clean the axle spindle and mounting surface thoroughly before installation.
- Torque the wheel bearing locknut to 137-174 ft lbs (186-235 Nm) for the Infiniti M platform.
- Inspect the existing ABS sensor and wiring harness before installation, as this hub does not include an integrated sensor.
About DUHUI Bearing
Manufactured by DUHUI Bearing – an automotive bearing supplier established in Zhejiang, China, in 2003. DUHUI produces wheel hubs to OE specifications. Contact us
